Abstract:The Finite Element method was used to analyze the dynamic response of pile groups in the ground subjected to the liquefaction-induced lateral flow of soils.The u-p Finite Element for-mulation was used to depict the coupling effect of water and sand soil particles in the Finite Ele-ment analysis.A 3D numerical model was developed to analyze the effect of a 2×2 pile group sub-jected to liquefaction-induced lateral spreading.In this model,sand was simulated using a pres-sure-independent multi-yield surface plastic model.Clay material served as a nonlinear hysteretic material with a multi-surface kinematic plasticity model,and the pile group maintained its linear behavior in the process of calculation.The clay layer and saturated sand layer were meshed in a 20-node brick element and separately in a 20-8 node element.The boundary of the numerical model was considered as the shear beam boundary,which simulated the shear effect of the soil layer dur-ing the earthquake.Finally,the Rayleigh damping method was used to model the damping of the system.The dynamic response of each pile in pile group was compared,and it showed that the bending moment and displacement time history of piles at different depths developed in the same way,and the time of maximum bending moment and displacement of the pile appears to lag be-hind the time of peak acceleration of the input seismic wave.The maximum bending moment and displacement of the leading pile were larger than the those of the back piles.By comparing the maximum bending moment and displacement,it can also be concluded that,as depth increases,the maximum bending moment first increases and then decreases.The bending moment of the pile at the 2.5 m depth was greater than those at other depths.In terms of displacement,as depth in-creased,the maximum pile displacement decreased,and the maximum displacement of the pile head was greater than other observed points on the pile.This demonstrated the different behaviors of the pile bending moment response.In order to consider the effect of pile spacing on the pile group effect,several Finite Element models were developed for different pile spacing.This model-ing concluded that the maximum bending moment appeared to occur in the boundary of different soil layers.As pile spacing increased,the maximum bending moment and pile head displacement in the group increased.In the pile group with pile spacing equal to 7D (diameter),the maximum bending moment of the each pile was very close.The difference was about 3% when pile spacing was equal to 5D ,and the difference was about 4%,when pile spacing was equal to 3D .The maxi-mum bending moment of the first pile group was 10% larger than the bending moment of the sec-ond pile group.In the last part of the study,the cause of the pile group effect was analyzed and a basic understanding of the seismic design requirements for this type of pile group was obtained.

3-D numerical analysis of large subsoil liquefaction distortion influence resulted from earthquake on bridge pile foundation

3D Dynamic Analysis of the Soil–foundation–superstructure System Considering the Elastoplastic Finite Deformation of Both the Soil and the Superstructure

Seismic Response and Failure Modes Analysis of Pile Foundations in Liquefiable Soils Using Various Design Criteria

Simulation of Impact of Pile Foundations at Liquefiable and Non-Liquefiable Site

Strong Seismic Response of Pile Group-soil Coupling System in Liquefied Ground

Analysis of the Bridge Pile Group Effect in Liquefaction-induced Lateral Spreading Sites

Nonlinear numerical analysis of piles-soil interaction in lateral spreading of liquefied ground

Finite Element Analysis of Pile-Soil-structure Dynamic Interaction in Liquefiable Site

Numerical Analysis of 4-Piles Model in Lateral Spreading of Liquefied Ground

Study on Dynamic Behavior for Pile-Soil-bridge Structure Seismic Interaction in Liquefying Ground under Strong Earthquake

Study on seismic response difference of horizontal and inclined liquefied site-pile-structure

Influence analysis of overlying soil layer to seismic behavior of inclined liquefiable soil and pile interaction system

Computer simulation on dynamic soil-pile-superstructure interaction system considering liquefiable foundation

Analysis on residual displacement of reinforced concrete bridge piers standing in liquefiable field

Simplified Method for Seismic Analysis of Bridge Pile Group Foundation in Liquefiable Soils

3D FEM Numerical simulation of seismic pile-supported bridge structure reaction in liquefying ground

Advances in failure mechanisms of pile foundations in liquefaction soils

Estimation of Bending Moment and Pile Displacement for Soil-Pile-quay Wall System Subjected to Liquefaction Induced Lateral Spreading

Analysis on Kinematic and Inertial Interaction in Liquefiable Soil-Pile-structure Dynamic System

3D Numerical Simulation of Large Ground Displacement Caused by Seismic Liquefaction

Effect of ground motion characteristics on seismic response of pile foundations in liquefying soil