Abstract:The proton-exchange membrane fuel cell (PEMFC) bipolar plate serpentine flow channel U-shaped region is prone to the accumulation effect, which poses serious difficulties for fuel cell water management. As a result, a deep understanding of water transport in the U-shaped region is essential to improve the fuel cell performance. Under this direction, in this work, the impact of the different microstructure parameters and initial conditions on water transport in the U-shaped region was compared with and without microstructure using the volume of the fluid method. On top of that, the velocity field distribution in the X-direction and the pressure drop distribution in the flow channel were also analyzed. From the acquired results, it was demonstrated that due to the secondary flow caused by the bending property of the microstructure, the droplet movement time in the U-shaped region was significantly shortened after the microstructure was added in the U-shaped region. The initial conditions strongly affected the droplet motion, and a larger contact angle enhanced the wall hydrophobicity to facilitate the droplet discharge. An increase in the droplet diameter led also to a rise in the windward area and shear force, which shortened droplet discharge time. Interestingly, if the waveform microstructure has too-large crests, gullies will be created that will impede the droplet motion and increase the amplitude of the droplet oscillation, resulting in excessive pressure drop in the flow channel. A too-large period led to increased droplet momentum loss, whereas a short period reduced the wall contact angle, which is not conducive to drainage. The microstructure spacing significantly affected the droplet motion, and the reduced spacing increased the airflow diffusion effect to accelerate the flow rate. The main focus of this work was led on the application of the microstructure in a U-shaped region of the serpentine flow channel, which is of great specific significance for droplet removal inside the flow channel.

Effect of Wall Charge on Striation in Plasma Display Cells

Striation in Large-Gap Coplanar Plasma Display Cells

Simulation Studies of Rib Structure Effect on Discharge Characteristics of Plasma Display Panel

Effect of surface photoemission on discharge in PDP

Electrical Modeling of Dielectric Barrier Discharge Considering Surface Charge on the Plasma Modified Material

Local Discharge and Distribution of Wall Charge in Coplanar Dielectric Barrier Discharge

P‐44: Influences of Applied Writing Pulses on the Wall Charge Distribution and Light Output in AC Plasma Display Panels

Effect of Surface Protrusion on Plasma Sheath Properties in Atmospheric Microdischarges

Study of ultra-violet efficiency in plasma display panel with various coplanar gap

Distribution Characteristics of Surface Charge of Dielectric Barrier Columnar Discharge in Atmospheric Helium

Effects of Microstructure on Water Removal in the U-Shaped Region of PEMFC Serpentine Flow Channel

Plasma enhancement of current from carbon cathodes for field emission displays

Wall charge and potential from a microscopic point of view

Streamer dynamics and charge self‐erasing of two counter‐propagating plasmas in repetitively pulsed surface dielectric barrier discharge

The Effect of Electron Distribution Function Anisotropy on Space Charge Saturated Sheath Critical Parameters in Hall Thrusters

Analyses on Depolarization Losses of Plasma-Electrode Pockels Cell

Development of panel structure for a high-resolution 21-in-diagonal full-color surface-discharge plasma display panel

Effects of nematic liquid crystal doped with multi-walled carbon nanotube on electro-optic properties and electrostatic discharge immunity of liquid crystal display device

The impact of catalyst structure and loading material on the dynamics of plasma propagation in dielectric barrier discharges

Effect of Space Charge on Interface Discharge Characteristics in Multilayer Dielectric

Eliminating Hysteresis Effects in Flexible Organic Light-Emitting Diodes