Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. Low-pressure ratio conditions are commonly encountered in radial turbines. When operating at low pressure ratio condition, a significant portion of the turbine energy loss occurs as residual velocity loss in the form of swirling flow at the outlet pipe. Typically, this energy can be recovered by the next stage turbine or reduced by the diffuser. However, there is a lack of experimental and simulation studies on the swirling flow at the outlet of turbines. The mechanism governing the changing pattern of swirling flow remains unclear, limiting the effective utilization and reduction of residual velocity loss. This study conducts theoretical and experimental research on turbine outlet swirling flow. Firstly, this paper introduces a novel two-dimensional hot-wire anemometry stepping mechanism for measuring swirling flow at a turbine outlet cross-section. Experimental results demonstrate that the proposed measurement method effectively captures the morphological changes of turbine outlet swirling flow. The results indicate a strong coupling relationship between axial and circumferential velocity. Subsequently, to elucidate the reasons for the coupling of velocity in two directions and the development of swirling flow in the outlet pipeline, simulations of turbine performance under different velocity ratio conditions were conducted. Results show that under a wide range of velocity ratios, not only does the direction of the turbine outlet swirling flow change, but it also leads to the swirl number exceeding the critical swirl ratio under high velocity ratio conditions, resulting in the formation of a central recirculation zone (CRZ) at the pipe outlet. The main cause of the strong coupling effect between velocities in two directions is attributed to the increased swirl intensity leading to enhanced adverse pressure gradients at the core of the vortex. Lastly, a model describing the variation of VGT turbine outlet swirling flow is established, indicating a linear relationship between the swirl number and the velocity ratio, with a steeper change as the pressure ratio decreases.

Loss models and loss analysis of variable geometry radial inflow turbine

A Novel Design Towards Reducing Leakage Loss for Variable Geometry Turbines

Experimental investigation of secondary flow losses in a variable geometry linear turbine cascade with winglet tip

Quasi-one-dimensional Loss Model of Volute Using Boundary Layer Approach for Inward Flow Radial Supercritical CO2 Turbines

An Investigation Of The Flow Structures And Flow Control In A Variable Geometry Turbine

Preliminary Design Of Multistage Radial Turbines Based On Rotor Loss Characteristics Under Variable Operating Conditions

A NOVEL PREDICTION MODEL FOR THE AERODYNAMIC LOSSES INCREASE DUE TO FILM COOLING INJECTIONS FROM GAS TURBINE VANE SURFACE

Experimental and numerical investigations of tip clearance flow and loss in a variable geometry turbine cascade

Flow Characteristics of the Radial Inflow Turbine Rotor of a Micro Gas Turbine

Analysis of flow field structure and loss of high pressure guide vane

Numerical Investigation of Flow and Loss in a Variable High-Pressure Guide Vane of 1＋1/2 Counter-Rotating Turbine

Flow Loss Mechanism in Radial Variable Area Nozzles

High-fidelity simulations of a high-pressure turbine vane with end walls: impact of secondary structures and spanwise temperature profiles on losses

Energy loss evaluation in radical inflow turbine based on entropy production theory and orthogonal experiment method

A total three-dimensional evaluation method to analyze the loss mechanism of film cooling on turbine guide vane

The Loss Mechanisms and Vortex Dynamics of Rotor Platform Step Geometries in a Low-Speed Research Compressor Stage

Investigation on Variable Guide Vane (VGV) Unsteady Flow Characteristic of Axial Turbine

Experimental and simulation study of energy loss mechanism of low pressure ratio radial turbine

High-Fidelity Simulations of a High-Pressure Turbine Vane Subject to Large Disturbances: Effect of Exit Mach Number on Losses

Optimization design of radial inflow turbine combined with mean-line model and CFD analysis for geothermal power generation

Flow Characteristics and Loss Models of the Transonic Radial Turbine