Abstract:The Magnetic fluid is a new type of magnetic material. It is a colloidal liquid made of nanoscale ferromagnetic particles suspended in a carrier fluid. Magnetic fluid sealing is one of the most successful applications of the magnetic fluid. As a new type of seal with the advantages of no leakage, long life and high reliability, magnetic fluid seal has been widely used under vacuum and low pressure differential condition. Two types of permanent magnets, the annular permanent magnets and the cylindrical magnets, are usually used in magnetic fluid seals in engineering. However, the influence of permanent magnet structure on sealing capacity was not clear, hence a new experimental setup was designed in order to study the influence of permanent magnet structure on sealing capacity. The annular permanent magnets and the cylindrical magnets were used as the magnetic source of the experimental setup in a series of tests respectively. The relationship between the sealing capacity of magnetic fluid seal and the end-face area, axial length of the magnet was analyzed by the electromagnetism theories and theoretical derivation. The result of the experiments shows that the sealing capability grows with the end-face area of the magnet, and the growth rate becomes much slower when magnet end-face area attains a certain value; the reluctance of pole pieces and shaft can't be ignored when magnetic field attains a certain value; the modified theoretical formula had a good match to the measured values when the end-face area of the magnet is small enough to ignore the reluctance of pole pieces and shaft.

Simulation and design of magnetic fluid sealing devices

Numerical Simulation for Magnetic Fluid Sealing Device

Design of Magnetic Circuit and Simulation of Magnetic Fluid Sealing

Simulation and Optimization of Magnetic Fluid Seal Structures

Magnetic field simulation and experimental investigation of magnetic fluid seal based on rotating shaft

Structure design study of vacuum magnetic fluid seal

Size parameters optimization design for magnetic fluid sealing pole shoe

Studies of Magnetic Fluid Plane Sealing in Split Sealing Device

Magnetic field finite element analysis and experimental verification of magnetic fluid seal with large gap

Field calculation and structure optimization using ANSYS in magnetic fluid seal

Numerical and Experimental Study of Magnetic Fluid Seal with Large Sealing Gap and Multiple Magnetic Sources

Numerical Calculation of Magnetic Force Exerted on the Shaft in Magnetic Fluid Seal

Modeling ad Hydrodynamic Simulation of Magnetic Fluid Seal Combined with Mechanical Seal

Analysis of Split Magnetic Fluid Plane Sealing Performance

Numerical Analysis and Experiment Study of Magnetic Fluid Boundary in Seals

Numerical Analysis on Boundary and Flow Regime of Magnetic Fluid in the Sealing Clearance with a Rotation Shaft

The Simulation of the Magnetic Particle Deposition and the Effect on the Magnetic Fluid Sealing Performance

Research on a Large Diameter Magnetic Fluid Seal with Thin-Wall Parts

Analysis on Seal Capacity of Magnetic Fluid Seal Using Ring Magnet

Analysis and Experimental Study on Magnetic Fluid Seal Mechanism

Theoretical Analysis and Experimental Study on the Influence of Magnet Structure on Sealing Capacity of Magnetic Fluid Seal