Abstract:Abstract High-temperature heat pipe is an ideal technical solution for microreactors applied for space missions, planet surface, and the small electricity markets on the ground. However, the internal fluid flow state and the effects of key parameters such as permeability, porosity, and capillary force of wick structure on the distribution of working fluid inside the heat pipe are difficult to measure experimentally. In this study, a general CFD model for heat pipe with wick structure that can predict the thermal behavior at different steady-state conditions was carried out. The thermal conduction through heat pipe shell, liquid film on the inner surface, and the formation of liquid reservoir at the bottom of heat pipe were considered in this model. A high-temperature heat pipe model considering the flow of liquid working fluid inside the wick structure was developed based on the Star-CCM+ numerical simulation software. The model used a combination of the liquid film model and the Volume of Fluid (VOF) model to simulate the effects of fluid flow and collection behavior inside the wick structure on the heat transfer characteristics of the heat pipe. The method included models for flow resistance and capillary driving force under steady-state conditions, centrifugal force and time-varying gravitational field under motion conditions, and mixed convective heat transfer caused by motion conditions. The accuracy of the numerical simulation was validated using typical potassium high-temperature heat pipe experiments. The effects of different permeability and capillary force characteristics of the wick structure on heat transfer and internal fluid distribution in the heat pipe were studied. Based on the current method, high-temperature heat pipes with different inclinations (0°, 90 °and 45°) were investigated. Additionally, non-uniform heating boundary conditions were added to the high-temperature heat pipe evaporator section to investigate its heat transfer performance under real reactor axial power input. This investigation lays the foundation for the design and analysis of the heat transfer characteristics of high-temperature heat pipes.

Modeling and Simulation of Micro Satellite Active Thermal Control System Using EHD Heat Pipe

Numerical Simulation of Thermal Distribution under Steady State in a Spherical Magnetohydrodynamic Attitude Controller

Thermal Characteristic and Analysis of Electro-Hydrostatic Actuator

Design and Verification of Thermal Control System of Communication Satellite

Semi-physical Simulation of Radiation for Active Thermal Control System of Spacecraft

Dynamic state-space modeling and model-based control design for loop heat pipes

Modeling and Simulation on Temperature Control System for Hot Pressure Welding

Modeling and simulation of aircraft integrated thermal management system

Simulation of thermal field of satellite on orbit influenced by multilayer insulation material

Design of a Combined Attitude and Thermal Control System for Small Satellites Based on Mechanicallypumped Fluid Loop

Simulation design and implementation of thermal control subsystem for satellite simulator

Design and thermal characteristic test of a temperature control system for spacecraft precision instrument

ELECTROHYDRODYNAMIC MINI FLAT HEAT PIPE FOR ADVANCED ELECTRONICS COOLING

Dynamic Thermal Behavior of Micro Heat Pipe Array-Air Cooling Battery Thermal Management System Based on Thermal Network Model

Simulation of, Optimization of, and Experimentation with Small Heat Pipes Produced Using Selective Laser Melting Technology

Modeling and Simulation for Temperature Control System of Environmental Control System Functional Test

Numerical Investigation of High-Temperature Heat Pipes with Different Wick Structures under Non-Uniform Heating Boundary Conditions

Integrated Aircraft Thermal Management System Modelling and Simulated Analysis

Numerical Simulation of Thermoelectric Based Temperature Control System for CubeSat in Space.

Passive thermal control technology of ZDPS-1A satellite

Numerical Simulation of Heat Pipe Thermal Performance for Aerospace Cooling System Applications