Abstract:Mask Projection Stereolithography (MPSL), due to its high printing resolution, is suitable for fabricating porous polymer architectures that are used as carbon scaffold precursors. In the present work, a carbon scaffold with a controllable small porous structure was fabricated by MPSL. A polymer lattice structure used as the carbon scaffold precursor was first fabricated by MPSL. Sodium chloride was selected as the granular support, and nano silica particles were introduced into the granular support so that sodium chloride could easily fill the lattice structure. A carbon scaffold with controllable low shrinkage (41.3%) and a small porous structure (skeleton thickness = similar to 40 mu m and pore size = similar to 300 mu m) was obtained by pyrolyzing the polymer lattice structure in the granular support, and subsequently, it was processed by hydrofluoric acid (HF). The unprocessed and HFprocessed scaffolds were both composed of simple substance carbon, and silicon oxide particles embedded on the unprocessed scaffold were cleaned by HF. Finally, the compressive properties of the scaffold were examined. The fracture appearances of the scaffold under the application of compressive forces parallelly and vertically to the stacking direction were different, and compressive properties in vertical to the stacking direction were superior to those in parallel to the stacking direction. Therefore, it can be inferred that the proposed method is effective in fabricating multi-scale carbon scaffolds with small controllable porous structures based on stress analysis to obtain optimum mechanical properties, which makes it a promising material for many applications.

Design and Preparation of Carbon Template with Tailored Porous System

Peparation of Porous Carbon Template with Controllable Channels by Phenolic Resin Pyrolyzing

A Facile Self-Templating Synthesis of Carbon Frameworks with Tailored Hierarchical Porosity for Enhanced Energy Storage Performance.

Preparation and properties study of porous carbon template based on SLA

Design of Carbon Materials with Ultramicro-, Supermicro- and Mesopores Using Solvent- and Self-Template Strategy for Supercapacitors

Preparation of Complex-Shape SiC Ceramic Composites Parts Derived from Phenolic Resin Template

Composition Design of Block Copolymers for Porous Carbon Fibers

Toward a Molecular Design of Porous Carbon Materials

Cellular Carbon Microstructures Developed by Using Stereolithography

Facile Synthesis of Hierarchically Porous Carbons from Dual Colloidal Crystal/Block Copolymer Template Approach

Carbon Scaffold with Controllable Small Pore Structure Based on Mask Projection Stereolithography

A Facile Strategy of Post-Impregnation to Fabricate Hierarchically Porous Carbons

Templating Methods for Preparation of Porous Structures

A Strategy of Bifunctional Nanoscale Melamine‐Resin Sphere Template to Fabricate Porous Carbons

Preparation of Interconnected Porous Carbon Monoliths by Reaction-Induced Phase Separation and Pyrolysis

Preparation and characterization of porous, biomorphic SiC ceramic with hybrid pore structure

Graphitic Porous Carbons Prepared by a Modified Template Method

Preparation and Basic Properties of a New Porous SiC Based on Scrap Cotton Liner

Preparation and Characterization of Porous Carbons Obtained from Mixtures of Furfuryl Alcohol and Phenol-Formaldehyde Resin

Preparation and application performance study of biomass-based carbon materials with various morphologies by a hydrothermal/soft template method

Ingenious construction of three-dimensional porous carbon foams and their polymer composites using template-based strategies