Abstract:For operation and manipulation with nanometric positioning precision, a single crystalline silicon micro XY-stage is developed by using double-sided bulk-micromachining technology. Front-side deep reactive ion etching combined with backside anisotropic etching constructs the high-aspect-ratio comb-driven XY-stage in a single standard silicon wafer (i.e., no silicon on insulator wafer is used). For integrating several electrostatic actuators in one silicon chip, different actuators are electrically isolated from each other using a trench-sidewall insulating technique. SiO2-refilled trench bars are formed on vertical trench sidewalls to isolate adjacent comb-drive elements. Combined with the reverse-biased p - n junction along the boron-diffused trench sidewall for comb driving, individual actuators can be operated independently. The developed XY-stage of 1600 x 1600 mu m(2) is suspended by four sets of folded-beam and bending-flexure composite springs. To maximize the moving distance, a two-segment comb finger with a gently curved transition is used for both improving the actuation efficiency and avoiding side instability of the stage. The experimental results verify the stage design including the gentle transition of a two-segment comb-drive scheme. Under 23 V driving voltage, a 10 mu m moving stroke is measured in each of the four directions. Compared with a conventional comb structure, the two-segment comb fingers contribute 70% improvement in actuating amplitude. The positioning precision of the stage is evaluated with a nano-mechanical indenting experiment. A scanning probe microscopy probe with an electrical-heated nano tip is put in contact with the surface of a polymethyl methacrylate film that is coated on the stage surface. Along with the movement of the stage, pulsed heating on the nano tip produces serial nano-pitches. With the nano-indenting experiment, better than 18 nm positioning precision is obtained for the XY-stage.

Analysis and Design for the Nano-positioning XY-Stage Based on the MEMS Technology

A Silicon Integrated Micro Nano-Positioning Xy-Stage for Nano-Manipulation

Design And Analysis Of Two Dimensional X-Y Micropositioning Stage

Integrating positioning X-Y stage based on bulk micromachining

A piezodriven three dimensional micropositioning stage for nano-manufacturing

Design and Verification of an XYZ Three-axis Micro Stage

Design And Simulation Of A Nano-Scale Micro Positioning Stage

Design Research of a Novel High Speed Nanometer Positioning System on Macro/Micro Driven for MEMS

Single-Wafer-Processed Nano-Positioning Xy-Stages with Trench-Sidewall Micromachining Technology

Investigation on A Novel Dual-Grating Macro-Micro Driven High Speed Precision Positioning System for Nems

Nano-Positioning X-Y Stage with the Function of Displacement Detection

A Novel Monopolar Cross-Scale Nanopositioning Stage Based on Dual Piezoelectric Stick-Slip Driving Principle

Single Neuron Adaptive Pid Control of the Silicon-Based Integrated Micro Nano-Positioning Xy-Stage

Modeling And Testing Of A Novel Decoupled Xy Nano-Positioning Stage

Design of A Parallel Kinematic Mems Xy Nanopositioner

A Novel XY Nano Positioning Stage with a Three Stage Motion Amplification Mechanism

Design and Analysis of a High-Speed XYZ Nanopositioning Stage

Design, optimization, and characterization of an XY nanopositioning stage with multi-level spatial flexure hinges for high-precision large-stroke motion guidance

Design and Testing of One-Dimensional Nano-Positioning Stage with Large Travel Range and High Resolution

Fabrication process analysis for nano-positioning stage based on silicon bulk micromachining

A Novel Piezoelectrically Actuated 2-Dof Compliant Micro/Nano-Positioning Stage with Multi-Level Amplification