Abstract:High-temperature superconducting (HTS) maglev owns the capability of passive stabilization and has the potential to operate at a high speed with low energy consumption. However, the excitation caused by the irregular surface and inhomogeneous magnetic field of the permanent magnet guideway (PMG) will result in vibration between the superconductors and PMG, which could lead to some stability problems such as drift. To study the reliability of HTS maglev systems under a long-term disturbance, a tailored experimental device composed of a vibration table, a fixture, and HTS maglev model was employed. The effects of field-cooling height (FCH), external excitation frequencies, and amplitudes on the levitation height drift were investigated. It is found that under the same operating conditions, large excitation amplitude, high frequency, and low FCH would lead to a greater levitation height drift. There are three kinds of drift trends, i.e., downward, upward, or downward at first and then upward, and the phenomenon of drifting upward is more likely to occur under small excitation amplitude, high frequency, and low FCH conditions. Meanwhile, two simulation models employing the flux flow model and the flux flow and creep model were applied respectively. The simulation results show that the flux flow and creep model are more consistent with the experimental phenomena and the flux flow has a greater influence on the drift in the initial time period, while the flux creep has a slighter impact on the drift for a long time. These researches reveal the levitation height drift rules of the HTS maglev system and introduce proper simulation model for levitation height drift so that this work provides a reference for the design and safe operation of HTS maglev vehicles.

HTS Levitated Mobile Technology and Prototype

Multi-objective Optimization for the Levitation System of the Electrodynamic Suspension Train with HTS Magnets

Design and Analysis of Parallel Hybrid-Excited Superconducting Linear Motor for High-Speed Electromagnetic Suspension Maglev

Design and Analysis of a Superconducting Induction Magnetic Levitation Device for Hydraulic Turbo-Generator

Development of a Conduction-Cooled HTS SMES

Design, Construction and Performance of an EMS-based HTS Maglev Vehicle

Manufacture and Preliminary Prototype Test of a HTS Suspension Electromagnet for Maglevs

Design and Analysis of Superconducting Magnets of a New Mixed Maglev Model

Levitation forces of an uncentralized high temperature superconductor thrust bearings

Levitation performance evolution of high-temperature superconducting maglev vehicle under electromagnetism-heat-force strong coupling

An Experimental Study on the Controllability of HTS Coils in MAGLEV Systems

Dynamic Simulation of the HTS Maglev Vehicle-Bridge Coupled System Based on Levitation Force Experiment

Dynamic Response Simulation of the HTS Bulk Over an Actual Permanent Magnet Guideway Using Different E-J Relationships

Feasibility Study of a DC Linear Motor Based on the Magnet Track of High-Temperature Superconducting Maglev

Running magnetic resistance of high-Tc superconducting maglev prototype vehicle in an evacuated tube track

Static Behavior of a Complex High Temperature Superconductor Thrust Bearings

Modeling of High- Tc Superconducting Bulk using Different Jc- T Relationships over Dynamic Permanent Magnet Guideway

Modeling and Dynamic Performance of Distributed Force in High-Temperature Superconducting Pinning Magnetic Levitation

Characteristic and magnetic field analysis of a high temperature superconductor axial-flux coreless induction maglev motor

Levitation Height Drifts of HTS Bulks under a Long-Term External Disturbance

Experimental Study of HTS Electromagnet and General Electromagnet