Abstract:The all-solid-state lithium battery (ASSB) has received great attention due to its greater safety than the conventional lithium-ion battery (LIB). Sulfide-based inorganic solid electrolytes are an important component to fabricate the ASSB. But to attain a better performance, the ionic conductivity and electrochemical stability of the sulfide-based solid electrolytes need to be improved. In this work, we prepared the metal-oxide-doped/mixed Li7P2S8I0.75Br0.25 lithium superionic conductors by a dry ball-milling process. The high ionic conductivity was achieved by a low-temperature (200 °C) heat-treatment process. The metal-oxide-doped Li7P2S8I0.75Br0.25 solid electrolyte exhibited a higher ionic conductivity value of 7.3 mS cm-1 at room temperature than the bare Li7P2S8I0.75Br0.25 solid electrolyte. The structural characteristics of the prepared solid electrolytes were studied by solid NMR and laser Raman analysis. The electrochemical stability of the prepared solid electrolyte was studied by cyclic voltammetry and DC charge-discharge analysis. The addition of metal oxide increased the electrochemical stability and dry-air stability of the Li7P2S8I0.75Br0.25 solid electrolyte. The Ta2O5-doped Li7P2S8I0.75Br0.25 solid electrolyte was stable even after 300 charge-discharge DC cycles and also 100 h of dry-air exposure. Further, the Ta2O5-doped Li7P2S8I0.75Br0.25 solid electrolyte-based ASSB exhibited a high discharge capacity value of 184 mA h g-1 at 0.1 C rate with 66% initial cycle Coulombic efficiency.

Synthesis and Characterization of Inorganic Solid Electrolytes of Li2O-SiO2-P2O5 and Li2O-TiO2-SiO2-P2O5 Systems

The “filler effect”: A study of solid oxide fillers with β-Li3PS4 for lithium conducting electrolytes

Enhanced ionic transport in lithium lanthanum titanium oxide solid state electrolyte by introducing silica

Preparation of Metal-Oxide-Doped Li7P2S8Br0.25I0.75 Solid Electrolytes for All-Solid-State Lithium Batteries

Lithium Lanthanum Titanium Oxide Solid-State Electrolyte by Spark Plasma Sintering

Inorganic-Organic Hybrid Sulfide Solid Electrolytes Based on the Tetraalkylammonium Iodide-LiI-Li 2 S-P 2 S 5 System

Achieving superior ionic conductivity of Li6PS5I via introducing LiCl

Effect of sintering temperature and holding time on the crystal phase, microstructure, and ionic conductivity of NASICON-type 33Na2O-40ZrO2-40SiO2-10P2O5 solid electrolytes

Cold Sintering of Li6.4La3Zr1.4Ta0.6O12/PEO Composite Solid Electrolytes

All-in-one improvement toward Li6PS5Br-Based solid electrolytes triggered by compositional tune

Strategies of Enhancing Ionic Conductivity in Model Solid‐State Electrolyte Li15P4S16Cl3

Synthesis of 3Li2S–1P2S5–xLiI solid electrolytes by liquid-phase shaking method for all-solid-state Li metal batteries

Li15P4S16Cl3, a Lithium Chlorothiophosphate as a Solid-State Ionic Conductor

Influences of ZrO2 content on microstructural and ionic conductivity of Li1.4Al0.4Ti1.6(PO4)3 solid-state electrolytes

A Solid Electrolyte Based on Electrochemical Active Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> with PVDF for Solid State Lithium Metal Battery

Preparation and Electrochemical Properties of Bicontinuous Solid Electrolytes Derived from Porous Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 Incorporated with Succinonitrile

Polymer Composite Electrolytes Containing Ionically Active Mesoporous SiO2 Particles

Enhanced Ionic Conductivity and Air Stability of Bi2se3-Doped 80Li2s-20P2s5 Solid-State Electrolytes

Synergistic Effect of Processing and Composition X on Conductivity of Xli2s-(100 − X)p2s5 Electrolytes

All-solid-state batteries with Li2O-Li2S-P2S5 glass electrolytes synthesized by two-step mechanical milling

Morphology-controlled synthesis of novel nanostructured Li4P2O7 with enhanced Li-ion conductivity for all-solid-state battery applications