Abstract:The process of CH4 reforming with H2S is an efficient approach to H-2 production, which can not only directly convert sour natural gases without separating H2S from CH4 but can also make full use of waste H2S, making it into high value-added products. In the present study, a MoO3/gamma-Al2O3 material was prepared and further applied to the CH4/H2S reforming process after in situ sulfidation treatment under an H2S/N-2 atmosphere at variable sulfidation temperatures (400-800 degrees C) and times (0-7 h). The reaction conversion and the H-2 production rate of sulfided catalysts were examined under the conditions of 800 degrees C and 1 atm with a molar ratio for CH4/H2S of 1.5 : 1 and a gas hourly space velocity (GHSV) of 15 000 h(-1). By combining various characterization techniques, such as X-ray diffraction, X-ray photoelectron spectroscopy and transmission electron microscopy, the effects of sulfidation factors on the structure and the catalytic performance of the Mo-based catalyst were studied. The catalytic activity increased at first and then reduced along with increasing the sulfidation temperature and time, implying the existence of optimal sulfidation conditions, which were identified to be around 500 degrees C for 1 h. Both the sulfidation temperature and time have significant influences on the transformation of MoO3 to MoS2 and consequently affect the phase composition, the crystal size, and the texture, as well as the surface Mo valence states of the sulfurized MoO3/gamma-Al2O3 catalysts. A catalyst structural evolution mechanism during sulfidation and the subsequent reaction process were proposed, and it was speculated that two simultaneous MoS2 formation routes, one through the MoO2 phase and the other through the Mo5+OxS phase, were involved. The relationship between the catalyst structure and the catalytic performance was further established, and the edge Mo atoms were assumed to cooperate with the neighboring surface Mo sites to catalyze the reaction together.

The Promoting Effect of Tellurium on K 2 MoO 4 /SiO 2 Catalyst for Methanethiol Synthesis from High H 2 S-Containing Syngas

Role of the Solvent Evaporating Temperature on the NiMo/TiO2-Al2O3 Catalyst and the Hydrodesulfurization Performance for 4,6-Dimenthyldibenzothiophehe

Promoting Effect of Mg in Supported Mo/HBeta–Al2O3 Catalyst for Cross-Metathesis of Ethene and Butene-2 to Propene

Influence of Carbonization Conditions on Structural and Surface Properties of K-Doped Mo2C Catalysts for the Synthesis of Methyl Mercaptan from CO/H2/H2S

In situ observation of the promoting effect of H2S on the formation of efficient MoS2 catalyst for CH4/CO2 reforming

Mo–Co–K Sulfide-Based Catalysts Promoted by Rare Earth Salts for Selective Synthesis of Ethanol and Mixed Alcohols from Syngas

Olefin Metathesis over Heterogeneous Catalysts: Interfacial Interaction Between Mo Species and a Hβ−Al2O3 Composite Support

Insights into the catalytic promotion of propylene self-metathesis over silica-supported molybdenum oxide using substituted olefins

Synthesis of Methyl Mercaptan on Mesoporous Alumina Prepared with Hydroxysafflor Yellow A as Template: The Synergistic Effect of Potassium and Molybdenum

Essential Role of Promoter Co on the MoS 2 Catalyst in Selective Hydrodesulfurization of FCC Gasoline

Methane Dehydroaromatization on Mo/Hmcm-22 Catalysts: Effect of Sio2/Al2o3 Ratio of Hmcm-22 Zeolite Supports

Sulfite-Enhanced Aerobic Methane Oxidation to Methanol over Reduced Phosphomolybdate

The Synergic Effect Between Mo Species and Acid Sites in Mo/HMCM-22 Catalysts for Methane Aromatization

Effect of sulfiding conditions on the hydrodesulfurization performance of the ex-situ presulfided CoMoS/γ-Al2O3 catalysts

Catalytic Performance and Texture of Teos Based Cu/Sio2 Catalysts for Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

Promoting Effects in Hydrogenation and Hydrodesulfurization Reactions on the Zirconia and Titania Supported Catalysts

Effect of Lanthanum Promotion on the Unsupported Mo–Co–K Sulfide Catalysts for Synthesis of Mixed Alcohols from Syngas

Tuning active sites in MoS2-based catalysts via H2O2 etching to enhance hydrodesulfurization performance

Sulfidation of MoO<sub>3</sub>/-Al<sub>2</sub>O<sub>3</sub> towards a highly efficient catalyst for CH<sub>4</sub> reforming with H<sub>2</sub>S

Effects of Cobalt Promoter and Reduction Temperature on the Surface Species and Syngas Adsorption of K–Co–Mo/C Catalyst for Mixed Alcohols Synthesis

Enhancement of Propylene Metathesis Performance of MoO 3 /Al 2 O 3 with Promotion of Phosphoric Acid