Abstract:Three-dimensional models of proton exchange membrane fuel cells (PEMFCs) with parallel and interdigitated flow channel designs were developed including the effects of liquid water formation on the reactant gas transport. The models were used to investigate the effects of the flow channel area ratio and the cathode flow rate on the cell performance and local transport characteristics. The results reveal that at high operating voltages, the cell performance is independent of the flow channel designs and operating parameters, while at low operating voltages, both significantly affect cell performance. For the parallel flow channel design, as the flow channel area ratio increases the cell performance improves because fuel is transported into the diffusion layer and the catalyst layer mainly by diffusion. A larger flow channel area ratio increases the contact area between the fuel and the diffusion layer, which allows more fuel to directly diffuse into the porous layers to participate in the electrochemical reaction which enhances the reaction rates. For the interdigitated flow channel design, the baffle forces more fuel to enter the cell and participate in the electrochemical reaction, so the flow channel area ratio has less effect. Forced convection not only increases the fuel transport rates but also enhances the liquid water removal, thus interdigitated flow channel design has higher performance than the parallel flow channel design. The optimal performance for the interdigitated flow channel design occurs for a flow channel area ratio of 0.4. The cell performance also improves as the cathode flow rate increases. The effects of the flow channel area ratio and the cathode flow rate on cell performance are analyzed based on the local current densities, oxygen flow rates and liquid water concentrations inside the cell.

Effects of Reactant Gas Flow Rates on the Current Distribution in a PEM Fuel Cell

Study of a PEMFC performance based on a novel current distribution measurement method

Measurement of Current Distributions in a PEM Fuel Cell with Interdigitated Flow Field

A novel technique for measuring current distributions in PEM fuel cells

Comparison of Current Distributions in Proton Exchange Membrane Fuel Cells with Interdigitated and Serpentine Flow Fields

In-situ Characterization of Gas Distribution in Proton Exchange Membrane Fuel Cell Stacks

Effects of Humidification Temperatures on Local Current Characteristics in a PEM Fuel Cell

Experiment study on the current density distribution of PEMFC

A Study of Dynamic Characteristics of PEM Fuel Cells by Measuring Local Currents

Combined Effects of Flow Channel Configuration and Operating Conditions on PEM Fuel Cell Performance

Simultaneous Measurement of Current and Temperature Distributions in a Proton Exchange Membrane Fuel Cell

The respective effect of under-rib convection and pressure drop of flow fields on the performance of PEM fuel cells

Current density and temperature distribution measurement and homogeneity analysis for a large-area proton exchange membrane fuel cell

Numerical Study of Cell Performance and Local Transport Phenomena in Pem Fuel Cells with Various Flow Channel Area Ratios

Numerical Analysis of Parallel Flow Fields Improved by Micro-Distributor in Proton Exchange Membrane Fuel Cells

Investigation of the non-uniform distribution of current density in commercial-size proton exchange membrane fuel cells

Simultaneous measurement of local current and temperature distributions in proton exchange membrane fuel cells with dead-ended anode

In situ investigation of heat and water distributions in the PEM fuel cell

Experimental Investigation on Local Behaviors of PEMFC with Segmented Cell

Study on the Effects of Manifold Structure on the Gas Flow Distribution Uniformity of Anode of PEMFC Stack with 140-Cell

Overall and Local Effects of Operating Conditions in PEM Fuel Cells with Dead-Ended Anode