Abstract:The dead-ended anode (DEA) operation could cause local flooding and local hydrogen starvation in proton exchange membrane fuel cells (PEMFCs), resulting in drastic changes in fuel cell performance. In order to study the detailed local dynamic characteristics of DEA operation, simultaneous measurements of the dynamic variation of local current and local temperature in a PEMFC with DEA have been performed using a local current measurement gasket and micro thermocouples. The results show that the local fuel cell performance distribution gradually becomes uneven during DEA operation and the evolutions of local current and temperature strongly depend on the locations along the flow channel. The highest local current and local temperature are observed near the anode inlet, posing serious threats for the local fuel cell. Furthermore, with anode purging, the current distribution becomes uniform quickly due to the fast mass transfer capacity of hydrogen, but the local temperatures take much longer time to become uniform and stable because of the thermal capacity of fuel cell components. The anode purging also causes local temperature undershoots and the amplitude is over 4°C in this study. Finally, the effects of operating conditions are discussed. The local current and temperature distributions become more uneven as overall operating current increases and operating temperature decreases. The local temperatures are all reduced as anode inlet pressure and air stoichiometry increase due to the enhanced convection cooling effect. It is demonstrated that measuring local current and temperature is effective in investigating local dynamic performance of PEMFCs with DEA.

Study of a PEMFC performance based on a novel current distribution measurement method

A novel technique for measuring current distributions in PEM fuel cells

Measurement of Current Distributions in a PEM Fuel Cell with Interdigitated Flow Field

Comparison of Current Distributions in Proton Exchange Membrane Fuel Cells with Interdigitated and Serpentine Flow Fields

Simultaneous Measurement of Current and Temperature Distributions in a Proton Exchange Membrane Fuel Cell

A Study of Dynamic Characteristics of PEM Fuel Cells by Measuring Local Currents

Experiment study on the current density distribution of PEMFC

Effects of Reactant Gas Flow Rates on the Current Distribution in a PEM Fuel Cell

Current density and temperature distribution measurement and homogeneity analysis for a large-area proton exchange membrane fuel cell

In situ investigation of heat and water distributions in the PEM fuel cell

Effects of Humidification Temperatures on Local Current Characteristics in a PEM Fuel Cell

Numerical Investigation of PEMFC Performance Based on Different Multistage Serpentine Flow Field Designs

Experimental Investigation on Local Behaviors of PEMFC with Segmented Cell

Current Density Distribution in Pefc

Synchronous Measurement of Temperature and Current Density Distribution of PEMFC

Performance simulation and key parameters in-plane distribution analysis of a commercial-size PEMFC

Investigating the Transport Characteristics and Cell Performance for a Micro PEMFC Through the Micro Sensors and CFD Simulations

Numerical Analysis of Parallel Flow Fields Improved by Micro-Distributor in Proton Exchange Membrane Fuel Cells

Investigation of the non-uniform distribution of current density in commercial-size proton exchange membrane fuel cells

Study of Internal Multi-Parameter Distributions of Proton Exchange Membrane Fuel Cell with Segmented Cell Device and Coupled Three-Dimensional Model

Simultaneous measurement of local current and temperature distributions in proton exchange membrane fuel cells with dead-ended anode