Abstract:Rotor crack occurs frequently in rotating machinery. It is of great significance to study the vibration mechanisms of the cracked rotor-bearing system, which can provide proofs for crack online monitoring. In this paper, a new dynamic model of the cracked rotor-bearing system is developed using the rigid body element (RBE) method, and vibration response analysis is then carried out. The rotor is discretized as a set of RBEs, and each two adjacent RBEs is connected by an elastic joint (EJ). Each EJ is modeled with six imaginary springs (three translational springs and three rotational springs). The breathing crack is modeled through time-varying stiffnesses of imaginary springs, which are obtained using real-time parameters (area, cross-section moment of inertia, and polar moment of inertia) in four processes (crack fully closed, crack partially opened, crack fully opened, and crack partially closed) in a full rotation angle. The interactions of adjacent RBEs are then given based on the force and moment analysis, and the bearing forces are obtained based on two models (i.e., equivalent spring-damper model, and Gupta bearing model). The equations of motions of the cracked rotor-bearing system are developed through Newton-Euler equations and solved by the fourth-order Runge-Kutta-Fehlberg method with a step-changing criterion. The displacement responses are then obtained, and the frequency spectrums of displacement responses and their instantaneous frequencies (IFs) under different rotation speeds are analyzed. Simulation results of the cracked rotor-bearing system are in good agreement with previously published results and experiment results. What’s more, analysis results show that the frequency spectrum of IF can be an indicator for online monitoring of the rotor crack.

Modeling on the Dynamics of Crankshaft with Crack in Fillet Region

Study on Fatigue Degradation Behavior of a Cracked Rotor Subjected to Lateral Vibration

Dynamics Behavior of Multi-Disk Flexible Rotor System with Transverse Crack

Multi-body dynamics and finite element method co-simulation for crankshaft dynamical strength analysis

Dynamic modeling and analysis of the internal gear transmission with tooth crack subjected to the heavy torque

Model for dynamic characteristics produced by inner race local defect in ball bearing system and its simulation

Analysis on Crankshaft System's Dynamical Behavior Based on Simulation and Experimental Methods

Dynamic modeling and vibration analysis of cracked rotor-bearing system based on rigid body element method

Dynamic characteristic analysis of rotating blade with breathing crack

Dynamic Instability and Steady-State Response of an Elliptical Cracked Shaft

An improved analytical dynamic model for rotating blade crack: With application to crack detection indicator analysis

Dynamic Characteristic Analysis of Rotating Blade With Transverse Crack—Part I: Modeling, Modification, and Validation

Crack modeling of rotating blades with cracked hexahedral finite element method

Study on Nonlinear DynamicsCharacteristic of a Gear Rotor with Transverse Crack

Dynamic Analysis of A Geared Rotor System Considering A Slant Crack on the Shaft

Study on rubbing characteristics of blade-casing model considering transverse cracks

Dynamic modeling and verification of rotating compressor blade with crack based on beam element

A novel geometric model of breathing crack and its influence on rotor dynamics

Dynamic analysis of cracked rotating blade using cracked beam element

Study on the Effect of Cracks in Diaphragm Couplings on the Dynamic Characteristics of Shaft System

Dynamic modeling and analysis of fluid-delivering cracked pipeline considering breathing effect