Abstract:Hydrocyclone separators are widely used in various industrial applications in the oil and mining industries to sort, classify, and separate solid particles or liquid droplets within liquid suspensions, which are considered to be multiphase systems. Numerous valuable studies have been conducted in recent years to investigate the flow fields inside hydrocyclones. However, much of the information regarding the performance of cyclones in the literature has limitations and much of it cannot be considered as completely applicable to most real-world applications; many of the studies investigated the flow fields within extremely simplified hydraulic designs that are not representative of the complex geometries or large sizes which are typical in industry. Therefore, in this study, the two-phase flow system inside the actual hydraulic geometry of a milling circuit hydrocyclone is explored with the aid of both computational and experimental techniques (particle image velocimetry (PIV)). More specifically, the flow field with an air core has been investigated. In addition, the air-liquid two phases flow in a hydrocyclone might cause some challenges on both the computational and experimental sides. Two turbulence models are utilized in the numerical calculations: the Reynolds stress model and large eddy simulation. The computational studies are mainly focused on the local flow behavior and the prediction of the dimensions and shape of the air core. Different section planes of hydrocyclone are selected as planes of interest and divided into several fields of view (FOV) for PIV measurements. Two-dimensional experimental velocity vector maps are obtained in each of the fields of view. The computational results are validated globally using pressure and flow rate readings at the boundaries and locally by comparison to the PIV velocity vector maps and profiles.

Numerical Simulation and New Understanding of the Hydrocyclone Flow Flied by Computational Fluid Dynamics

Study on Separation Performance of Tri-Cone Water Medium Cyclone Based on CFD

Numerical Simulation of Field Flow within Hydrocyclone

Computational Study and PIV Validation of Flow Field in a Hydrocyclone

Numerical Study of Particle–fluid Flow in Hydrocyclones with Different Body Dimensions

Study on Inner Vortex in a Hydrocyclone Through Numerical Simulation

Numerical simulation of three-dimensional two-phase flow in hydrocyclone

Experimental Study on the Three-Dimensional Two-Phase Flow Field in a Hydrocyclone

Numerical Simulation of Fluid Flow and Oil-Water Separation in Hydrocyclones

Numerical simulation of liquid-liquid turbulent separation flows in a double-cone hydrocyclone

Numerical study of the multiphase flows and separation performance of hydrocyclone with tapered cross-section inlet

CFD Numerical Simulation of Flow Velocity Characteristics of Hydrocyclone

Experimental and Numerical Investigations of the Fluid Flow in a Hydroclyclone with an Air Core

Numerical investigation on distribution characteristics of dense dispersed phase in hydrocyclones

Numerical Simulation of the Flow Field and Performance of an Innovative Cyclone Separator with a Downward Discharge of Gases

Analysis of Gas–Liquid–Solid Three-Phase Flows in Hydrocyclones Through a Coupled Method of Volume of Fluid and Discrete Element Model

Selection of numerical approaches to calculate the high-speed rotating flow field within a cyclone separator

Numerical Study of the Gas–liquid–solid Flow in Hydrocyclones with Different Configuration of Vortex Finder

Numerical Simulation of Oil-Water Separation in Hydrocyclones Using Algebraic Slip Mixture Model

Numerical Analysis of Hydrocyclones with Different Vortex Finder Configurations

Numerical Study of the Particle Movements and 'Fish-Hook' Phenomenon in Hydrocyclones