Abstract:This study attempts to clarify the correlation between the structural parameters of vortex finders (diameter ratio and insertion depth) and the strong turbulent flow field and performance of cyclone separators. To elucidate the effects due to the overflow pipe diameter, insertion depth, and Reynolds number on the tangential velocity index (n) and separation efficiency, 0.3D, 0.4D, 0.5D, 0.6D, and 0.7D (where D is the diameter of the cyclone separator’s cylindrical section) were selected as the vortex finder diameter and insertion depth, which were studied using three methods: computational fluid dynamics (CFD) software Fluent, experiments, and artificial neural network simulations. With Fluent, the Reynolds stress model (RSM) of turbulence was adopted to describe transport equations, and the discrete phase model (DPM) for two-phase flow was used to calculate the efficiency and separate particles at different inlet velocities. Experiments were conducted to measure the operational pressure drop and separation efficiency of the system; subsequently, the results were used to validate the CFD calculation results. Finally, a 5–5-1 three-layer artificial neural network was established based on 336 sets of data for values of n obtained from numerical simulations. In addition, a backpropagation (BP) artificial neural network model was employed to predict the correlation between the structural and operational parameters of the cyclone separator and n values. The obtained results indicate that the BP artificial neural network can accurately predict the distribution of n values within the flow field of the cyclone. Increasing the diameter of the vortex finder with the same inlet velocity can reduce the total pressure drop due to the cyclone, thereby reducing the kinetic energy loss and improving the separation efficiency of fine particles. Increasing the insertion depth of the vortex finder leads to an increase in the values of n. Considering the stability of the flow field structure and energy dissipation, an S/D value between 0.5 and 0.6 is preferred.

Study on Inner Vortex in a Hydrocyclone Through Numerical Simulation

Study on Separation Performance of Tri-Cone Water Medium Cyclone Based on CFD

Numerical Simulation of Three Dimensional Gas-Particle Flow in a Spiral Cyclone

Numerical Study of Dense Solid-Liquid Flow in Hydrodynamic Vortex Separator Applied in Recirculating Biofloc Technology System

Numerical investigation of hydrocyclone inlet configurations for improving separation performance

Numerical Study on Oil and Water Two-Phase Flow in A Cylindrical Cyclone

CFD Numerical Simulation of Flow Velocity Characteristics of Hydrocyclone

Numerical Simulation of Fluid Flow and Oil-Water Separation in Hydrocyclones

Numerical simulation of three-dimensional two-phase flow in hydrocyclone

Interaction effects of inlet velocity and apex diameter on the separation performance of two-stage cone hydrocyclones

Effect of separation space on the separation performance of cylindrical hydrocyclones

Oil-water separation in a cylindrical cyclone with vortex finder

Numerical Simulation of Three-Dimension Flow Field in a New-Type Cyclone Separator with a Radial Inlet Structure

Experimental and Numerical Investigations of the Fluid Flow in a Hydroclyclone with an Air Core

Simulation and experimental study of effect of vortex finder structural parameters on cyclone separator performance

Numerical analysis on the influence of vortex motion in a reverse Stairmand cyclone separator by using LES model

Development of an integrated multichannel inlet for improved particle classification in hydrocyclones

Geometrical configuration of hydrocyclone for improving the separation performance

Analysis of Gas-Liquid-Solid Three-Phase Flows in Hydrocyclones Through a Coupled Method of VOF and DEM

A study on gas flow in spiral inlet cyclone separator

Simulation calculation of cyclone separation efficiency