Abstract:Although the interaction of gas and coal has been comprehensively investigated in coalbed methane (CBM) extraction process, fewer scholars have taken the effect of temperature and groundwater into account, which brought a large deviation for CBM extraction design. In this study, a fully coupled thermal–hydraulic–mechanical model (THM) including coal deformation, gas seepage, water seepage, and thermal transport governing equations is developed and solved using the finite element (FE) method. The coal mass is simplified as a dual-porosity and single-permeability media while CBM migration is considered as a tandem process of desorption, diffusion and seepage. The dynamic evolution model of permeability serving as the coupled term for THM model is developed under the combined impact of stress, water pressure, gas pressure, gas adsorption/desorption and temperature. The proposed model is first verified by showing that the modeled gas production rate and water production rate match reasonably with the in-situ measured ones. Different coupled models for CBM extraction were comparatively analyzed by accomplishing a series of simulations. It is found that the gas production rate of models ignored water effect monotonously reduces over time; while the model considered water effect rises at beginning and then gradually reduces. The model ignored water effect will overestimate gas production, and the model ignored thermal effect will underestimate gas production, particularly coal seam contains considerable amount of water. The evolution of permeability is the competition result of two opposite effects: the matrix shrinkage effect caused by temperature reduction, the matrix swelling effect caused by gas pressure decrease and methane adsorption increase. A rising permeability resulted from the integrative action of both lower reservoir temperature and pressure during CBM extraction is observed. The impact of initial water saturation on gas production can not be ignored in the whole extraction process, especially during the water drainage period. Gas production rate of CBM well decreases with initial reservoir temperature, initial water saturation and Langmuir volume constant, while increases with the Klinkenberg factor. Permeability rate increases with initial water saturation and Klinkenberg factor, however decreases with initial reservoir temperature. As Langmuir volume constant increases, the peaking value of gas production rate increases and delays. The Klinkenberg effect promotes coalbed methane migration significantly, ignoring which will underestimate the gas production, and the impact of Klinkenberg effect gradually increases with the drop of gas pressure.

Coal-bed methane percolation numerical simulation considering gas slippage and water-gas coupling

Numerical Simulation of Pressure Gradient of Coalbed Gas Outburst and Migration Considering Moving Boundary

A Permeability Model for Gas Flow in Coal Considering the Water Content and Slippage Effect

Permeability evolution and gas flow in wet coal under non-equilibrium state: Considering both water swelling and process-based gas swelling

Experimental and numerical investigation on the effect of moisture on coal permeability

Study on Numerical Simulation of Gas–Water Two-Phase Micro-Seepage Considering Fluid–Solid Coupling in the Cleats of Coal Rocks

Gas seepage laws based on dual porosity and dual permeability: Numerical simulation and coalbed methane extraction practice

Solid-Gas Coupling Model and Numerical Simulation of Coal Containing Gas Based on Comsol Multiphysic

Combined Effects of Stress, Gas Adsorption, and Temperature on the Evolution of Coal Seam Permeability and Slippage Effect

Fluid-Solid Coupling Characteristics of Methane-Containing Coal during Borehole Extraction of Coalbed: Numerical Modeling and Experimental Research

Multi-field coupling effect on coalbed methane seepage characteristics and numerical simulation

Numerical simulation of a coupled gas flow and geomechanics process in fractured coalbed methane reservoirs

A model of fully coupled two-phase flow and coal deformation under dynamic diffusion for coalbed methane extraction

A fully coupled thermal-hydraulic-mechanical model with two-phase flow for coalbed methane extraction

Numerical solution for borehole methane flow in coal seam based on a new dual-porosity model

Numerical Simulation On Effect Of Gas Drainage In Coal Seam Under Hydraulic Fracturing

Simulation Study of Coal Seam Gas Extraction Characteristics Based on Coal Permeability Evolution Model under Thermal Effect

Experimental study of gas transfusion with slippage effects in hypotonic coal reservoir

Numerical Investigation on the Coupled Gas-Solid Behavior of Coal Using an Improved Anisotropic Permeability Model

Research on a dynamically coupled deformation and gas flow model applied to low-permeability coal

Coal Permeability Evolution under Different Water-Bearing Conditions