Abstract:Industrial-use VOx-based catalysts usually have a higher active temperature window (> 250-300°C), which becomes a “bottleneck” for the practical application of PCDD/Fs catalytic degradation technology. In this work, VOx-FeOx/TiO2 catalyst prepared via mechanochemically method was investigated for the catalytic removal of PCDD/Fs. The removal efficiency of 1,2-DCBz, pure PCDD/Fs gas generated in the lab, PCDD/Fs from actual flue gas, long-term were studied, and the degradation mechanism was explored using FTIR and TOFMS. The degradation efficiency of 1,2-DCBz and PCDD/Fs on VOx-FeOx/TiO2 were higher than that of VOx/TiO2 catalyst, and the optimal FeOx addition ratio was 3 wt.%. The characterization results show that the addition of FeOx can effectively improve the pore structure, surface acidity, and VOx dispersion of the catalyst, thus contributing to increasing the V5+ content and surface-active oxygen, which is conducive to the improvement of adsorption and redox performance of the catalyst. Under the actual MSWI (municipal solid waste incineration) flue gas, the PCDD/Fs removal efficiency over VTi-3Fe-MC maintained long-term stability, higher than 85% for 240 min. This result was not significantly reduced compared with the data obtained in the laboratory. According to the analysis results of intermediate products by FTIR and GC-TOFMS, it can be inferred that the epoxidation fracture of benzene ring is the rate-limiting step of dioxin catalytic degradation reaction. This work gives an in-depth view into the PCDD/Fs removal over VOx-FeOx/TiO2 catalysts and could provide guidelines for the rational design of reliable catalysts for industrial applications.

In Situ DRFTIR Study of Propylene Selective Oxidation

Mechanistic Study of Propylene Oxidation over a Bi–molybdate Catalyst by in Situ DRIFTS and Probe Molecules

In Situ Diffuse Reflectance Infrared Fourier Transform Spectroscopy of Selective Ammoxidation of Propylene over Multi-component Bismuth Molybdate Catalysts

Selective Oxidation of Propene Catalyzed by Modified Ferric Molybdate with Hollow Structure

In Situ Drifts Investigation Of C4 Hydrocarbons Selective Oxidation To Ma On A Vpo Catalyst

Promoting Effect of FeOx Addition on the Mechanochemically Prepared Vanadium-Based Catalyst for Real PCDD/Fs Removal and Mechanism Insight

Selective Oxidation of Methanol to Dimethoxymethane over Iron and Vanadate Modified Phosphotungstate

Coking Process of Catalyst Based on In-Situ Diffuse FT-IR Spectroscopy in Reaction of Methanol to Propene

Deep oxidation of propane over PtIr/TiO 2 bimetallic catalysts: Mechanistic investigation of promoting roles of Ir species

A DFT and Microkinetic Study of Propylene Selective Oxidation on Cu2O(111) Surface with O2: Chlorinum Effect

Selective Oxidation of Propane in Supercritical Propane Homogeneously Catalyzed by Iron (III) Tetrakis (pentafluorophenyl) porphyrin

Propylene Production via Oxidative Dehydrogenation of Propane with Carbon Dioxide over Composite MxOy-TiO2 Catalysts

Photocatalytic Oxidation of Propane Using Hydrothermally Prepared Anatase-Brookite-Rutile TiO2 Samples. An In Situ DRIFTS Study

Concerted oxygen diffusion across heterogeneous oxide interfaces for intensified propane dehydrogenation

A DFT study of epoxidation of propylene on dimer MoO(x)

Periodic Dft Study of the Deep Oxidation in the Oxidative Dehydrogenation of Ethane over V2o5 (001)

Coupling acid catalysis and selective oxidation over MoO3-Fe2O3 for chemical looping oxidative dehydrogenation of propane

The Application of in Situ FT-IR in the Research of Methane Oxidation

Exploring structure, temperature and activity correlations in the selective oxidation of lower olefins over Bi-Mo-Co-Fe-O catalysts by spatial reactor profile measurements

Photocatalytic Propylene Epoxidation with O2 over 4,4′-Dibromobenzophenone Modified Carbon Nitride Coupled with TS-1

From microkinetic model to process: understanding the role of the boron nitride surface and gas phase chemistry in the oxidative dehydrogenation of propane