Watt-level long-wave infrared CdSe pulsed-nanosecond optical parametric oscillator
Ke Yang,Junhui Li,Yanzhao Gao,Disheng Wei,Baoquan Yao,Jian Wang,Hongjuan Cheng,Jinwen Tang,Shuyi Mi,Xiaoming Duan,Tongyu Dai
DOI: https://doi.org/10.1016/j.optlastec.2021.107491
2022-01-01
Abstract:In this paper, using two cadmium selenide (CdSe) crystals, we have demonstrated signal-resonant pulsed-nanosecond optical parametric oscillators (OPOs) in linear and rectangular ring cavity designs with output powers of up to 1.03 W at 10.15 μm (idler) and 1.18 W at 11 μm (idler) were obtained, respectively. A Q-switched Ho:YAG laser at 2.09 μm with a pulse repetition frequency of 1 kHz was used as the OPO pump source. At the maximum output power level of the idler at 10.15 μm, the corresponding slope efficiency and optical conversion efficiency were 5.22% and 2.33%, respectively, with a spatial beam quality of M2 < 10.8. Similarly, we also recorded the slope efficiency and optical conversion efficiency at 11 μm to be around 5.38% and 2.73%, respectively, with a spatial beam quality of M2 < 5.1. The idler wavelength is tunable in the 10.2–10.05-μm range for the linear cavity OPO with output power varying from 0.98 W at 10.2 μm to 1.09 W at 10.05 μm by varying the internal crystal angle from 72.7° to 73.39°. Similarly, the wavelength tunability of the idler was recorded to be 11.2–10.9 μm for the rectangular ring cavity OPO with output power varying from 1.04 W at 11.2 μm to 1.26 W at 10.9 μm by varying the internal crystal angle from 69.6° to 70.39°.
optics,physics, applied