Abstract:Microbeam radiotherapy (MRT) is a novel concept in radiation oncology with arrays of alternating micrometer-wide high-dose peaks and low-dose valleys. Preclinical experiments have shown a lower normal tissue toxicity for MRT with similar tumor control rates compared to conventional radiotherapy. A promising candidate for the demanded compact radiation source is the line-focus x-ray tube. Here, we present the setup of a prototype for an electron accelerator being able to provide a suitable x-ray beam for the tube. Several beam dynamic calculations and simulations were performed concerning particle tracking, thermal and electrostatic properties of the electron source, resulting in a proper beamline, including the cathode, the pierce electrode (PE) and the focusing magnets. These parts are discussed separately. The simulations showed that a rectangular cathode with a small width of 0.4mm is mandatory. To quickly shut down the electron beam, an additional voltage of -600V must be applied to the PE. Moreover, the electric field inside the vacuum chamber stays below 10MVm-1 to minimize the risk of field emission. The thermal simulation validates a small displacement of 0.1mm of the heated cathode with respect to the PE, which must be considered during manufacturing of the cathode-PE assembly. The simulations lead to an adequate choice of cathode, electrodes and beamline to achieve the required focal spot of 0.05×20mm2 with a beam current of 0.3A and an electron energy of 300keV. With this setup first MRT experiments with high dose rates up to 10Gys-1 can be executed.

Monte Carlo Study on Focus Properties of Portable Ultrabright Microfocus X-Ray Sources

A Simulation Study on the Flash X-Ray Spectra Spatial Distribution

Determining the Focal Spot Limit of 1 MeV X-ray Targets: Monte Carlo Simulation of the Point Spread Function

Study of the Microfocus X-Ray Tube Based on a Point-Like Target Used for Micro-Computed Tomography.

Simulation Study on a Gridded Micro-Focus X-ray Electron Gun Based on Carbon Nanotube Cathode

Optimization of Focusing Structure for a Micro-Focus X-ray Source

High Beam-Current Density of a 10-Kev Nano-Focus X-ray Source

Review on simulation methods of micro focal spot x-ray tubes' electron emission system

A study of X-ray emission from the anode region in a plasma focus device

Monte Carlo Study of the Influence of Electron Beam Focusing to Sem Image Sharpness Measurement

Tungsten Target Optimization for Photon Fluence Maximization of a Transmission-Type Flat-Panel X-Ray Source by Monte Carlo Simulation and Experimental Measurement

Design and Simulation for the Electron Optical System of Micro-Beam X-ray Source

Practical Design of the Electron Gun for a Microfocus X-Ray Source

Computer Simulation of Double-gated Field Emission Cathode

Practical Design of the Focusing System for Transmission and Reflection Targets in X-ray Sources

Monte Carlo method for calculating the radiation skyshine produced by electron accelerators

Research and development of an electron beam focusing system for a high-brightness X-ray generator

Simulation of Electrostatic Self-Focusing Lanthanum Hexaboride Electron Gun Applied in X-Ray Source

A novel electron source for a compact x-ray tube for microbeam radiotherapy with very high dose rates

Study of the Influence of Uniform Transverse Magnetic Field on the Dose Distribution of High Energy Electron Beam Using Monte Carlo Method

Monte Carlo Simulation of Radiation Dose Distribution in X-ray Imaging at Shanghai Synchrotron Radiation Facility.