Abstract:The improvement of enzymatic glucose sensors, which have outstanding advantages such as high sensitivity, good selectivity, and convenient operation, is crucial because of the increasing demand for the diabetics detection. Here, we prepared the ZnONRs-based glucose sensor by hydrothermally synthesizing the ZnO nano-rods (ZnONRs) on a flexible PET substrate. The electrodeposited reduced graphenes (rGO) with different deposition cycles were coated onto the ZnONRs to modify the surface of working electrodes. The high conductivity of rGO promoted the transmission of redox electrons, which significantly improved electron transport between solution and electrode. Also, the rGO smoothed the rough surface of the working electrodes, which negligibly increased the contact angles, reduced the contacting surface area between the working electrodes and the PBS solution, and further decreased the enzyme adsorption that influences the redox electron yield. Nevertheless, the former positive effect was more significant than the latter negative one, which eventually gave rise to better performance of the rGO/ZnONR-based glucose sensors. Thereby, in the Nafion/GOx/rGO-20/ZnONRs/Au/PET sensors, the sensitivity increased by 9.2 times, the detection limit decreased by 47 times, and the linear range was extended from 7.5 mM to 12 mM, compared with sensors without rGOs. Additionally, both of the ZnONRs-based and rGO/ZnONRs-based glucose sensors show strong anti-interference performance in the test environment containing urea, uric acid, and ascorbic acid.

Enzymatic Glucose Biosensor Based on ZnO Nanorod Array Grown by Hydrothermal Decomposition

An Amperometric Glucose Biosensor Based on the Immobilization of Glucose Oxidase on the ZnO Nanotubes

A rapid response time and highly sensitive amperometric glucose biosensor based on ZnO nanorod via citric acid-assisted annealing route

ZnO Nanorods/au Hybrid Nanocomposites for Glucose Biosensor.

ZnO nanoparticle and multiwalled carbon nanotubes for glucose oxidase direct electron transfer and electrocatalytic activity investigation

Nanorod arrays composed of zinc oxide modified with gold nanoparticles and glucose oxidase for enzymatic sensing of glucose

Fabrication and Characteristic of ZnO Glucose Oxidase Enzyme Electrode Based on Flexible Substrate

Immobilization of glucose oxidase on ZnO nanorods decorated electrolyte-gated field effect transistor for glucose detection

Sensitive enzymatic glucose detection by TiO2 nanowire photoelectrochemical biosensors

Non-enzymatic glucose sensing using hydrothermally grown ZnO nanorods: sensitivity augmentation by carbon doping and carbon functionalization

Non-Enzymatic Glucose Sensor Composed of Carbon-Coated Nano-Zinc Oxide

Preparation of ZnO Nanoparticles in a Reverse Micellar System and Their Application in Glucose Biosensor

Improved Enzyme Immobilization for Enhanced Bioelectrocatalytic Activity of Choline Sensor

Improved Enzyme Immobilization for Enhanced Bioelectrocatalyticactivity of Glucose Sensor (Chinese)

Glucose biosensor based on functionalized ZnO nanowire/graphite films dispersed on a Pt electrode

Doping Ag in ZnO Nanorods to Improve the Performance of Related Enzymatic Glucose Sensors

ZnO Nano-Array-based EGFET Biosensor for Glucose Detection

Performance Enhancement of ZnO Nanorod-Based Enzymatic Glucose Sensor Via Reduced Graphene Oxide Deposition and UV Irradiation

Highly Efficient Non-Enzymatic Glucose Sensor Based on CuO Modified Vertically-Grown ZnO Nanorods on Electrode.

An enzymatic glucose biosensor based on a glassy carbon electrode modified with manganese dioxide nanowires

Fabrication of a Novel ZnO–CoO/rGO Nanocomposite for Nonenzymatic Detection of Glucose and Hydrogen Peroxide