Abstract:Microwave vacuum drying (MVD) was reported to be an efficient method to dehydrate vegetables. In this study, fresh okra was dehydrated by this technique. Orthogonal design was used to optimize the drying parameters (microwave power, vacuum level, and loading density) to achieve high drying rate and product quality. Microwave power (500, 700, and 900 W), vacuum level (45, 60, and 75 kPa) and loading density (3, 4, and 5 kg/m(2)) were set up as the treatment factors. Drying rate, energy consumption, rehydration rate, color change, total phenol, and flavonoid contents were evaluated as the responding quality parameters. The optimal drying parameters of okra were identified as 900 W of microwave power, 60 kPa of vacuum level and 5 kg/m(2) of loading density. Fresh okra was then dehydrated under MVD, hot air drying, and vacuum freezing drying. Results showed that microwave vacuum drying method was most efficient, with the drying rate as high as 2.36 +/- 0.05 g/min. The contents of total phenol and flavonoid in the products of microwave vacuum drying had no significant difference from that of vacuum freeze drying and were significantly higher than that of hot air drying. Practical applications MVD is an efficient and energy-saving technology, compared with the conventional hot air drying or vacuum freeze drying. Meanwhile, it could retain the color, flavor, nutrients, and bioactive compounds in the product, thus it is a promising method to dehydrate vegetables and fruits. Okra is rich in nutrients and is of increasing demand worldwide. Whereas it tends to spoil even at refrigerated temperature, so that a practical drying art is essential to be developed. This study proved the feasibility and efficiency of dying okra by MVD, and worked out an optimized drying condition under MVD, which could be a guide in okra processing industry.

Optimization for vacuum belt drying process of Radix Salvia Miltiorrhiza extract

Optimization for Vacuum Belt Drying Process of Rehmannia Leaves Extract

Optimization for vacuum belt drying process of Panax notoginseng extract

Optimization of Microwave Vacuum Low-temperature Drying Process for Rehmannia Glutinosa Libosch Leaves Extract

RSM As an Approach to Optimize Ginger Intermittent Microwave Drying Process

Optimization of Alcohol Precipitation Process of Salviae Miltiorrhizae Water-extraction Solution by Orthogonal Design with Multi-index Comprehensive Evaluation

Quality Evaluation of Panax Notoginseng Extract Dried by Different Drying Methods

[Study on Extraction Kinetics of Salviae Miltiorrhizae Radix Et Rhizoma: Model Establishment and Investigation of Critical Process Parameters].

Microwave Vacuum Drying Properties and Kinetics Model of Radix Paeoniae Rubra Extract

Optimization of membrane dispersion ethanol precipitation process with a set of temperature control improved equipment.

Effects of different drying methods on the contents of active ingredients of Saposhnikovia divaricata (Turcz.) Schischk and optimization of the drying process by response surface methodology

Mathematical Modeling for Thin Layer Vacuum Belt Drying of Panax Notoginseng Extract

Energy, Exergy and Economic Analysis of a Vacuum Belt Drying System Integrated with Mechanical Vapor Recompression (MVR) for Aqueous Extracts Drying

Optimization of Spray Drying Process of Coptidis Rhizoma Extract by Orthogonal Test

A novel mechanical vapor compression vacuum belt drying system: Model development, experimental verification and performance prediction

Study on Optimal Extraction Technology for Volatile Oil in Radix Angelicae Sinensis

Optimization of Extraction Process for Polysaccharide in Salvia Miltiorrhiza Bunge Using Response Surface Methodology

American Ginseng Slice Drying and Optimization: Effect of Different Drying Methods on Drying Kinetics and Physicochemical Properties

Effect of Drying Treatment Methods on the Quality of Salvia Miltiorrhiza Bge.

[Optimization of the Circulatory Percolation Process for Extraction of Radix Ginseng Rubra].

Optimization of microwave vacuum drying of okra and the study of the product quality