Abstract:In this study, the hot uniaxial compression of the heat-treated Mg-12Y–1Al alloy containing long-period stacking ordered (LPSO) phase was conducted by a Gleeble-3500 simulator. Compressive mechanical properties at elevated temperatures and the effects of deformation temperature (300–450 °C) and strain rate (0.001–1 s −1 ) on the hot deformation behavior of the alloy were systematically investigated. Combining with an optical microscope (OM), electron backscatter diffraction (EBSD), and in-grain misorientation axes (IGMA) analysis, the microstructure and texture evolution, dislocation slip, and dynamic recrystallization (DRX) mechanism of the alloy was studied in detail. The results showed that the flow stress decreased with the increase in temperature and the decrease in strain rate. At a strain rate of 1 s −1 , the compressive strength at 300 °C and 350 °C was basically the same. After deformation, the morphology of Al 2 Y had almost no change, while the LPSO underwent apparent kinking deformation. The increase in temperature was conducive to DRX. The DRX mechanism of the alloy mainly included discontinuous dynamic recrystallization (DDRX) and continuous dynamic recrystallization (CDRX), and DDRX was dominant. The dense lamellar LPSO at the grain boundary was detrimental to the occurrence of DDRX. In addition, the deformed microstructure presented a typical [0001]//CD (compression direction) texture. With the increase in temperature, the texture intensity decreased progressively due to the activation of multiple slip systems and the increased DRX fraction. At a strain rate of 0.01 s −1 , when the temperature increased to 450 °C, the number of deformed grains dominated by pyramidal II slip increased substantially.

Deformation behavior and microstructure evolution of Mg-9Gd-4Y-0.6Mn alloy at 293 723 K

Microstructure Evolution and Properties of Mg-9Gd-0.8Al Alloy with Lamellar Phase During Extrusion at Different Temperatures

Hot Deformation and Processing Map of As-Homogenized Mg–9Gd–3Y–2Zn–0.5Zr Alloy

Hot Deformation Behaviour and Constitutive Equation of Mg-9Gd-4Y-2Zn-0.5Zr Alloy

Hot Deformation Behavior and Processing Map of Coarse-Grained Mg–Gd–Y–Nd–Zr Alloy

Deformation mechanism of fine grained Mg–7Gd–5Y–1.2Nd–0.5Zr alloy under high temperature and high strain rates

Hot Deformation Behavior and Finite Element Simulation of Mg–8.3Gd–4.4Y–1.5Zn–0.8Mn Alloy

Deformation Behavior and Dynamic Recrystallization of Mg-Y-Nd-Gd-Zr Alloy

Effect of Deformation Parameters on Recrystallization Behavior and Long-Period Stacking-Ordered Phase of Mg-9Gd-4Y-2Zn-0.5Zr Alloy

Hot compression behavior and microstructure evolution of Mg-Gd-Y-Zn-Zr alloy

Thermal Deformation Behavior and Processing Maps of As-Homogenized Mg-5.8 Zn-0.5 Zr-1.0 Yb Alloy

The abnormal flow behavior of Mg-9Gd-4Y-2Zn-0.5Zr alloy during hot tensile deformation at high temperature and low strain rate

High strain rate compression deformation mechanism and constitutive equation of fine grained Mg–7Gd–5Y–1.2Nd–0.5Zr alloy at different temperatures

Revealing the deformation behavior and microstructure evolution in Mg-12Y–1Al alloy during hot compression

High temperature deformation behavior of Mg-5wt.%Y binary alloy: Constitutive analysis and processing maps

Deformation Behavior and Dynamic Recrystallization of a Mg–Zn–Y–Zr Alloy

Microstructure evolution, strengthening mechanisms and deformation behavior of high-ductility Mg−3Zn−1Y−1Mn alloy at different extrusion temperatures

Flow softening and dynamic recrystallization behavior of a Mg-Gd-Y-Nd-Zr alloy under elevated temperature compressions

Hot compression behavior, simulation verification and dynamic recrystallization mechanism of Mg-Gd-Y-Zr alloy

The high-temperature deformation and microstructural evolution mechanism of Mg-Gd-Y-Zn-Zr alloy formed by CMT arc additive forming

Hot Deformation Behavior of Rare Earth Magnesium Alloy Without Pre-Homogenization Treatment