Abstract:The influence of the improvement of the finned tube radiator unit structure on the fluid flow and heat transfer effect of the locomotive was studied. A saw-toothed fin structure with aluminum instead of copper was proposed to keep the position and size of the flat copper hot water pipe unchanged. CFD simulation analysis was carried out by ICEPAK17.0, under the conditions of an ambient temperature of 24.6 °C, atmospheric pressure of 85,040 Pa and air density ρ = 0.94 kg/m3, to compare the changes of velocity field, temperature field, turbulence field and field synergy angle. The sawtooth structure of the new heat sink increases the turbulence effect of the fluid, reduces the thickness of the outer boundary layer of the water pipe, and strengthens the heat transfer effect of the radiator. Finally, the baffle height, wing window width and sawtooth angle of the sawtooth structure were selected, and the heat transfer coefficient and pressure under three conditions of low, medium and high were used as indexes to analyze the influence of each parameter on the performance of the radiator. The results show that the heat dissipation effect of the serrated aluminum sheet is higher than that of the copper sheet, the heat transfer coefficient is increased by about 1.3%, the average pressure is reduced, the turbulence performance is improved, the synergy angle is reduced by about 2.3°, and the new radiator has better performance. The fin factor has the greatest influence on the heat transfer coefficient and the least influence on the pressure. When the baffle is about 0.15 mm high, the heat transfer coefficient is the largest, and the height change has the highest effect on the pressure. The included Angle factor has the least influence on the heat transfer effect, and the influence on the pressure is higher. By changing the fin window structure, the thermal performance of the finned tube radiator can be improved.

A New Technology for Brazing of Aluminum Alloy to Copper of CPU Radiator

Contact reaction brazing process of aluminum alloy to copper with LHG-S2 brazing paste

High frequency induction contact reactive brazing of aluminum to stainless steel

Aluminum Solder Paste and Its Application

Ultrasonic-Assisted Semi-Solid Forming Method and Microstructure Evolution of Aluminum/Copper Brazed Joints

New technology for brazing aluminum clustered tube of refrigerator

A New Technology for Contact Reactive Brazing of Aluminum to Stainless Steel in Composite Electro-Thermal Cooker

Soldering process of aluminum fins in radiator

Controlled Atmosphere Brazing of 3003 Aluminum Alloy Using Low-Melting-Point Filler Metal Fabricated by Melt-Spinning Technology

Low-temperature diffusion brazing of actively metallized Al 2 O 3 ceramic tube and 5A05 aluminum alloy

A Comparative Study of Friction Stir Brazing and Furnace Brazing of Dissimilar Metal Al and Cu Plates

Study on laminar structure and process on high strength brazed aluminum alloy for heat exchangers

Study on microstructure and mechanical properties of 3003 aluminum alloy joints brazed with Al-Si-Cu-Ni paste brazing materials

Microstructure and Properties of Dissimilar Butt Joints of Aluminum to Copper by Cold Metal Transfer with Preheating

Study on Interfacial Reaction Behavior and Properties of Al/Zn-3Al/Cu Fluxless Brazed Joint

Resolve of Fragile and Defect Problem for a New Contact Reaction Brazing Aluminum to Stainless Steel

Joining Aluminium to Red Copper by High-Frequency Induction Brazing with Argon Shielding

Study on Optimization of Copper to Aluminum for Locomotive Finned Tube Radiator

Brazing of Copper Pipes for Heat Pump and Refrigeration Applications

Exploring the Role of Liquid Braze Filling the Dissimilar Cf/C-Haynes 230 Joint to Enhance the Interfacial Heat Transfer

Brazing Between High Purity Alumina Ceramic and Oxygen-Free Copper