Abstract:With recent technological advances and the growing interest in environmentally friendly fiber production processes, the textile industry is increasingly turning to the spinning of filaments from recycled raw materials in the melt spinning process as the simplest method of chemical spinning of fibers. Such processes are more efficient because the desired active particles are melt-spun together with the polymer. The study investigates the melt spinning of recycled polyamide 6 (PA 6) fibers modified with zinc oxide nanoparticles (ZnO NPs) in concentrations ranging from 0.1 to 2.0 wt% of the polymer. The extrusion process was optimized under laboratory conditions. An analysis of the effectiveness of the nanoparticle distribution and chemical composition was performed using scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR). The results of the thermal analysis show an increase in the glass transition temperature of the extruded material from 50.97 °C (raw polymer) to 51.40 °C to 57.98 °C (polymer modified with ZnO NPs) and an increase in the crystallization point from 148.19 °C to a temperature between 175.61 °C and 178.16 °C, while the molar enthalpy (ΔHm) shows a decreasing trend from 65.66 Jg−1 (raw polymer) to 48.23 Jg−1 (PA 6 2.0% ZnO). The FTIR spectra indicate PA 6 polymer, with a characteristic peak at the wavelength 1466 cm−1, but pure ZnO and PA 6 blended with ZnO show a characteristic peak at 2322 cm−1. The distribution of nanoparticles on the fiber surface is more or less randomly distributed and the different size of NPs is visible. These results are confirmed by the EDS results, which show that different concentrations of Zn are present. The mechanical stability of the extruded polymer modified with NPs is not affected by the addition of ZnO NPs, although the overall results of strength (2.56–3.22 cN/tex) and modulus of elasticity of the polymer (28.83–49.90 cN/tex) are lower as there is no drawing process at this stage of the experiment, which certainly helps to increase the final strength of the fibers. The results indicate the potential of modification with ZnO NPs for further advances in sustainable fiber production.

Preparation and Characterisation of Antistatic Nylon-6 Filled with Zno Whiskers

Electric Conductivity and Thermorheology Properties of Polyacrylonitrile/Nylon6 Composites Filled with Carbon Black

Preparation of ZnO/Nylon 6/6 nanocomposites, their characterization and application in dye decolorization

Effect of Thermal Oxidative Aging on the Crystallization Behavior and Properties of Nylon-6

Dynamic mechanical behavior of fiber reinforced polymer composites embedded with ZnO whiskers

Electrical Properties of T-ZnO_w/PTFE Composites

Preparation of Nanosized Zno and Dielectric Properties of Composites Filled with Nanosized Zno

Phase stability and melting behavior of the α and γ phases of nylon 6

Preparation and Characterization of Nylon-6/Carbon Nanotubes Composites by Co-precipitation Process

Preparation and performance of epoxy resin-based thermal conductive composites with different morphologies of ZnO

Processing and mechanical performances of ZrO2 reinforced thermoplastic Nylon 6 composites for gear applications

Effects of Zinc Oxide Nanoparticles on the Morphology and Viscoelastic Properties of Polyamide 6/poly(butylene Terephthalate) Blends

Characterization of Melt-Spun Recycled PA 6 Polymer by Adding ZnO Nanoparticles during the Extrusion Process

Dynamic compressive response and failure behavior of fiber polymer composites embedded with tetra-needle-like ZnO nanowhiskers

Preparation and characterization of polypropylene composites reinforced by functional ZnO/lignin hybrid materials

A New Facile Method for Preparation of Nylon-6 with High Crystallinity and Special Morphology

Masterbatch of Chitosan Nanowhiskers for Preparation of Nylon 6,10 Nanocomposite by Melt Blending

Effect of zinc oxide suspension on the overall filler content of the PLA/ZnO composites and cPLA/ZnO composites

Enhance the thermal conductivity and mechanical properties of CF/PPBESK thermoplastic composites by growth ZnO nanowires with tunable length and diameter on prepreg

Fabrication and characterization of electrospun mats of Nylon 6/Silica nanocomposite fibers

Mechanical Properties Of Stainless Steel Fiber/Carbon Nanotube Filled Nylon Conductive Composites