Abstract:This research investigates the effects of molding sequence and fiber content on the properties of bamboo fiber composites for optimized processing technology. Fabricating bamboo fiber‐reinforced epoxy composites (BFREs) using the vacuum‐assisted resin transfer molding (VARTM) process has many advantages, such as low cost, high product quality, controllability, and broad applicability. However, the immature fabrication process seriously affects product performance and hinders the full exploitation of the advantages of the VARTM process. The effects on the physical‐mechanical and thermal properties of BFREs by molding sequence and fiber content were investigated in this study. The molding sequence of fiber compression followed by resin injection was beneficial to ensure hermeticity, thus reducing the voids in the BFREs. The mechanical properties of BFREs gradually increased with increasing fiber content. With 50 wt% fiber content, the bending strength and modulus, shear strength, and impact toughness of BFREs reached 71.27 MPa, 6.78 GPa, 11.68 MPa, and 5.45 kJ/m2, respectively. Although the thermal stability of the BFREs was slightly lower than that of pure epoxy, the bamboo fibers' high rigidity evidentially increased the epoxy's dynamic mechanical properties. The life cycle assessment indicated that the BFREs effectively reduced the environmental impacts and production energy consumption compared to the glass fiber correspondent. The VARTM‐fabricated BFREs have great potential for construction, transportation, household items, packaging, sports equipment, and leisure goods applications. Highlights Fiber compression followed by resin injection could ensure great hermeticity. Micro‐CT accurately measured the void characteristics of the composites. Voids had detrimental effects on the properties of the composites. Dense bamboo fiber preforms enhanced the mechanical properties of epoxy. Bamboo fibers reinforcing epoxy reduced the impact on the environment.

Double-Vacuum-Bag Process for Composites

Process parameters optimization of double‐vacuum‐bag technology for carbon fiber/resin composites

Investigation on a Novel Low Temperature/Vacuum Bag Cure Prepreg

Vacuum Chamber Infusion for Fiber-Reinforced Composites

An Automated Vacuum Infusion Process for Manufacturing High-Quality Fiber-Reinforced Composites

Vacuum Infusion For Processing Thermosetting Composites Containing High Loading Solid Fillers

Vacuum freeze drying forming process for wood fiber composite product

An Enhanced Vacuum-Assisted Resin Transfer Molding Process and Its Pressure Effect on Resin Infusion Behavior and Composite Material Performance

An experimental study on filling of gaps and void pockets during vacuum-bag-only consolidation of fiber placed preforms

Research on Void Dynamics during In Situ Consolidation of CF/High-Performance Thermoplastic Composite

Effect of process parameters on the surface quality of air cushion method

Influence of Processing Parameters on Void Content in VARI Manufacturing Techniques

Study on Void Formation in Multi-Layer Woven Fabrics

Rapid Vacuum Infusion and Curing of Epoxy Composites with A Rubber-Cushioned Mold Design

Interface Controlled Micro- and Macro-Mechanical Properties of Vibration Processed Carbon Fiber/Epoxy Composites

Evaluation of the vacuum infusion process objectives at the early stages of computer simulation

A unique method for curing composite materials by introducing vibration treatment into the hybrid heating process

A mild, environmental, and low-destructive recycling strategy for the 3D multiaxial braided composites cured by the vacuum-assisted resin transformed molding process

Improvement of Chemical Liquid Vaporized Infiltration Process for Fast Densification of Carbon/Carbon Composites

Bamboo fiber‐reinforced epoxy composites fabricated by vacuum‐assisted resin transfer molding (VARTM): Effect of molding sequence and fiber content

Effect of Vacuum Thermo-Cycling on Physical Properties of Unidirectional M40J/AG-80 Composites