Abstract:A lot of mixed clay-resin waste sand from large-scale iron foundries is discharged every day; so mixed waste sand reclamation in low cost and high quality has a great realistic significance. In the study to investigate the possibility of reusing two types of waste foundry sands, resin bonded sand and clay bonded sand which came from a Chinese casting factory, a new low-cost reclamation method of the mixed foundry waste sand based on the wet-thermal composite reclamation was proposed. The waste resin bonded sand was first reclaimed by a thermal method and the waste clay bonded sand was reclaimed by a wet method. Then, hot thermal reclaimed sand and the dehydrated wet reclaimed sand were mixed in certain proportions so that the hot thermal reclaimed sand dried the wet reclaimed sand leaving some water. The thermal reclamation efficiency of the waste resin bonded sand was researched at different heat levels. The optimized wet reclamation process of the waste clay bonded sand was achieved by investigating the effects of wet reclamation times, sand-water ratio and pH value on the reclaimed sand characteristics. The composite reclamation cost also was calculated. The research results showed that the properties of the mixed reclaimed sand can satisfy the application requirements of foundries; in which the temperature of the thermal reclamation waste resin bonded sand needs to be about 800 oC, the number of cycles of wet reclamation waste clay bonded sand should reach four to five, the optimal sand-water ratio of wet reclamation is around 1:1.5, and the pH value should be adjusted by adding acid. The mass ratio of hot thermal reclaimed sand to dehydrated wet reclaimed sand is about 1:2.5, and the composite reclaimed sand cost is around 100 yuan RMB per ton.

Study on Reclamation and Recycling Use of Α-Starch Compound Binder Bonded Sand for Green Mold

The High-Temperature Resistant Mechanism of Α-Starch Composite Binder for Foundry

Preliminary Study on Strengthening Mechanism of Thermally Reclaimed Molding Sand

Recycled sand for sustainable 3D-printed sand mold processes

In House Reuse and Reclamation of Used Foundry Sands with Sodium Silicate Binder

Study on Synthesis and Properties of Modified Starch Binder for Foundry

Study on the technological adaptability of the reclaimed sand applied in the chemical bonded sand

Reclamation of Green Sand Containing Hot-Box Resin Sand and Its Application

A New Low-Cost Method of Reclaiming Mixed Foundry Waste Sand Based on Wet-Thermal Composite Reclamation

A Novel Reclamation Method of Chemical–Mechanical Grinding for Inorganic Binder Waste Sand in Aluminum Alloy Casting Process

The Environmental Characteristics of Sand Mould Casting and the Development Trend of Casting Binders

Regeneration of used sand with sodium silicate binder by wet method and their core manufacturing

Research on forming method of additive manufacturing of frozen sand mold

Study of Thermal and Wet Reclamation Technology of Used Sodium Silicate Bonded Sand

Fabrication and posttreatment for inorganic binder jetting sand molds for casting

Adhesive bonding and self-curing characteristics of α-starch based composite binder for green sand mould/core

Process Tests on Precoated Sand Prepared by Reclaimed Clay-Bonded Sand

Recycled sand from sandstone waste: A new source of high-quality fine aggregate

A New Phosphate Binder for Making Sand Mold or Core for Aluminum Alloy Castings

Research on Changing Regularity of Green Sand Properties

Research on Performance of Foundry Sand under the Effect of Chemical Binder