Abstract:We designed and manufactured an optical bistability waveguide device based on nonlinear one-dimensional photonic crystal used CdS_xSe_(1-x) doped glass. This kind of semiconductor doped glass has large nonlinear refractive index and nonlinear fast response time. The distribution of refractive index of the nonlinear one-dimensional photonic crystal waveguide satisfies sine function. We obtained the nonlinear photonic crystal waveguide by exposure holography and etching techniques. Length of the photonic crystal waveguide is about 3 mm. The height of the peak-groove of the waveguide is 0.1 μm. According to our design, the center of bandgap of the one-dimensional photonic crystal lies at 514.5 nm while the power density of the incident light, the incident light was reflected by the photonic crystal. When the power density of the incident light increasing, the bandgap is shifting to the direc-tion of short wavelength due to the decreasing of the refractive index with the increasing of the incident power density, so more incident light is transmitted. In experiment, we used an active mode-locking pulse of Ar ion laser as the light source which wavelength is 514.5 nm, repeating frequency is 82 MHz and pulse width is 200 ps. The light beam was coupled into the device by prism with a laser average power of 1.28 W (in the case of nonlinear saturation operation, optimum coupling efficiency is about 6%). Pulse wave forms of incident light and transmitted from sample were recorded in turn by 7 904 oscilloscope. The optical bistability curve of input power density and output one is fitted by computer. We obtained the threshold power density of bistable switch to be 1.60×10~5 W/cm~2 (it is equivalent to average power of 77 mW) and both the rise and fall time are 63 ps. We used the Finite Difference Time Domain Method to obtain the characteristics of the bandgap shift with the incident power density increasing of the nonlinear photonic crystal and calculate the optical bistability curve of this device. In theory, the threshold power density of bistable switch is about 1.40×10~5 W/cm~2 and the switch time is about 50 ps. The theoretical results agree well with the experimental ones. This device is a new and feasible one for optical information process and optical computing in the future.

Using One-Dimensional Nonlinear Photonic Crystal For Dynamical Addressing Optical Interconnection

DYNAMICAL ADDRESSING OPTICAL INTERCONNECTION BASED ON ONE-DIMENSIONAL NONLINEAR PHOTONIC CRYSTAL

Strong Nonlinear Optics In On-Chip Coupled Lithium Niobate Microdisk Photonic Molecules

Development of Silicon Photonic Devices for Optical Interconnects

Integrated Nanophotonic Devices for Optical Interconnections

Silicon Photonic Network-on-chip and Enabling Components

Soft-Lithography-Based Inter-Chip Optical Interconnects

1D@0D Hybrid Dimensional Heterojunction-Based Photonics Logical Gate and Isolator

Inverse‐Designed Integrated Nonlinear Optical Switches

Nonlinear Nanophotonic Chip-space Interfaces Enabled Multi-dimensional Engineering of Structured Optical Vortices

Nonlinear-optical Phase Modification in Dispersion-Engineered Si Photonic Wires.

Studies of optical interconnection in photorefractive crystals

A Novel Soft-Lithography Based Coupling Structure For Optical Interconnection

Multi-dimensional Data Transmission Using Inverse-Designed Silicon Photonics and Microcombs

Nonlinear Photonic Crystals: From 2d To 3d

OPTICAL BISTABILITY SWITCHING PROPERTY IN ONE-DIMENSIONAL NONLINEAR PHOTONIC CRYSTAL

Nonlinearity Tolerant High-Speed DMT Transmission with 1.5-Μm Single-Mode VCSEL and Multi-Core Fibers for Optical Interconnects

Unidirectional Transmission in 1D Nonlinear Photonic Crystal Based on Topological Phase Reversal by Optical Nonlinearity

Valley-dependent Topological Photonic Crystals with Heterogeneous Bearded Interfaces for SOI-based Integrated Optical Devices

Characteristics of Optical Bistability of Nonlinear One-dimensional Photonic Crystal Waveguide

Inverse-designed multi-dimensional silicon photonic transmitters