Abstract:This paper outlines the aerodynamic optimization of stator vane settings for multi-stage compressors via the combination of an artificial neural network (ANN) and a genetic algorithm (GA). The investigation is conducted on a newly developed 5-stage highly loaded axial flow compressor. A three-layer perceptron neural network is employed as surrogate model, replacing an in-house one-dimensional blade stacking computation code. The stagger angles of the four stator vanes serve as the input data of the ANN, and the compressor aerodynamic performances are the outputs of the network. The well-trained ANN is subsequently incorporated into the optimization framework, which is based on an improved real-coded GA. Various advanced strategies, including the elitism operator, blend crossover, non-uniform mutation and self-adaption parameters, are introduced to the GA to promote the searching efficiency and solution globality. The optimization is conducted on the reference operating points under both design- and part-speed conditions to achieve maximum adiabatic efficiency with restrictions on the pressure ratio. The results show that for the design speed, the original stator vane setting is good, and the room for growth in efficiency is limited based on the one-dimensional optimization. However, the optimized stator vane settings improve the adiabatic efficiency by more than 1% under part-speed conditions, and the enhanced efficiency is achieved over the entire operating range. Regardless of the assumption of quasi-one-dimensional flow, the effectiveness of the optimization framework in dealing with the stage-mismatching is demonstrated. Moreover, a new sensitivity analysis method using ANN is proposed to evaluate the relationships between the geometric parameters and aerodynamic performances of the compressor.

Application of a Simulated Annealing and Response Surface Model in Optimization Design of Moving Compressor Vanes

Multi-objective Optimization of Transpiration Cooling for High Pressure Turbine Vane

A throughflow-based optimization method for multi-stage axial compressor

Three-dimensional aerodynamic optimization design method using simulated annealing and response surface model

Aerodynamic Shape Optimization of a Transonic Fan by an Adjoint-Response Surface Method

Aerodynamic design optimization of compressor blade using genetic algorithms and response surface model

Design optimization of transonic compressor stage using CFD and response surface model

Simulation of Optimization of Variable Geometry for a Turbofan Engine of a Missile

Optimized Design of Axial Compressor Blades

Design Optimization Of Transonic Compressor Rotor Using Cfd And Genetic Algorithm

Coupled Aerothermodynamics Optimization for the Cooling System of a Turbine Vane

Design of swept rotor of transonic compressor by numerical optimization

Mathematical Simulation and Design Optimization of a Novel Swing Vane Compressor

Multi-Objective Aerodynamic Design Optimization Based On Camber Line And Thickness Distribution For A Transonic Compressor Rotor

Dynamic optimization design of a fan rotor based on design of experiment and response surface model

Multi-objective Optimization of a 3D Vaneless Diffuser Based on Fuzzy Theory

Simulated Annealing Algorithm Applied to Optimize Design of Turbine Cascades

Numerical Optimization for Stator Vane Settings of Multi-Stage Compressors Based on Neural Networks and Genetic Algorithms

Optimal Design and Analysis of a High-Load Supersonic Compressor Based on a Surrogate Model

Semi-Inverse Design Optimization Method for Film-Cooling Arrangement of High-Pressure Turbine Vanes

A3-D Numerical Optimization Design Method and Its Application in Axial Fans with Outlet Guide Vanes