Abstract:Due to its easy implementation and comprehensive applicability, surrogate model has been widely used in the aerodynamic design optimization (ADO) of turbomachinery blades. Machine learning method, rapidly developed and applied in many disciplines, is beneficial to model training. The paper works on ADO of a transonic fan rotor by blade sweeping using a supervised learning model method. First, verifications of numerical simulation and specifications of blade design optimization are given. Then the principles and implementations of an adaptive Gaussian Process (GP) are introduced. The acquisition function for adaptive sampling firstly increases and then decreases and ultimately converges in the process of model update. Meanwhile, performance predictions of the swept blades are achieved using GP model. From probability estimation and Sobol sensitivity analysis, some priori design knowledge revealing the impacts of blade sweeping on aerodynamic performance is preliminarily discovered. The results demonstrate that the concerned performance parameters are sensitive to the design parameters on the outer spans of the rotor blade. Finally, multi-objective optimization maximizing the total pressure ratio and adiabatic efficiency with constrained mass flow rate is carried out and the Pareto front is determined. The results of the original and three swept blades are compared in detail to illustrate the effects of blade sweeping to flow variations. For the transonic rotor, forward sweeping favors the increase of total pressure ratio, while backward sweeping on the outer spans favors the increase of adiabatic efficiency.

Aerodynamic design optimization of compressor blade using genetic algorithms and response surface model

Aerodynamic Optimization of a Transonic Fan Rotor by Blade Sweeping Using Adaptive Gaussian Process

Aerodynamic Shape Optimization of a Transonic Fan by an Adjoint-Response Surface Method

Flow Reconstructions and Aerodynamic Shape Optimization of Turbomachinery Blades by POD-based Hybrid Models

Adjoint Aerodynamic Optimization of a Transonic Fan Rotor Blade with a Localized Two-Level Mesh Deformation Method

A Gradient-Based Method Assisted by Surrogate Model for Robust Optimization of Turbomachinery Blades

Multi-Objective Design Optimization of a Transonic Compressor Rotor Using an Adjoint Equation Method

An Optimization on the Stacking Line of Low-Pressure Axial-Flow Fan Using the Surrogate-Assistant Optimization Method

Performance Sensitivity Analysis and Aerodynamic Optimization of Compressor Cascades by a Turbulence Adjoint Method

Adjoint-Response Surface Method in Aerodynamic Shape Optimization of Turbomachinery Blades

A throughflow-based optimization method for multi-stage axial compressor

Multipoint Design Optimization of a Transonic Compressor Blade by Using an Adjoint Method

Aerodynamic Optimization Design of Airfoil Configurations Based on Cascade Feedforward Neural Network

The Blade Shape Optimization of a Low-Pressure Axial Fan Using the Surrogate-Based Multi-Objective Optimization Method

Blade Design with Three-Dimensional Viscous Analysis and Hybrid Optimization Approach

Three-Dimensional Optimization of Blade Lean and Sweep for an Axial Compressor to Improve the Engine Performance

Three-Dimensional Aerodynamic Optimization of a Multi-Stage Axial Compressor

Optimization Method for Turbine Airfoil Designing Using Genetic Algorithms, CFD and Parallel Computing

Advanced Aerodynamic Optimization System for Turbomachinery

Aeromechanical optimization of first row compressor test stand blades using a hybrid machine learning model of genetic algorithm, artificial neural networks and design of experiments