Abstract:A spill of radionuclide-bearing molten salt is one of the major postulated events that needs to be analyzed for liquid fluorine salt–cooled high-temperature reactor (FHR) or molten salt reactor licensing purposes. In this postulated event, radioactive source term materials (RSTMs) in the molten salt are discharged from the reactor vessel to the reactor building. The release of RSTMs from the spilled salt pool to the gas space in the reactor building is expected to be controlled by the cooling behavior of the spilled salt, including the growth and shrinkage of the solid crust on the surface of the spilled salt pool. This paper presents a simulation model for spilled salt pool heat transfer and validation efforts. The validation data come from two molten salt spill tests that were performed recently: the PELE2 test by the Rapid Experimental Laboratory of Kairos Power LLC (KP) and the Argonne salt cooling test conducted by Argonne National Laboratory. The former was a large-scale test involving kilograms of molten spilled FLiNaK salt, and the latter was a relatively smaller-scale test targeting various processes associated with a salt spill event. Both tests generated valuable data sets that can be used to assess salt cooling and validate evaluation models. This paper provides a new one-dimensional model that can simulate the cooling process of a spilled salt pool as well as the thermal responses of heat structures, such as the stainless steel liner and the concrete below the salt. The model has been implemented as part of KP-SAM code, which is a branch of the systems code SAM specific to KP FHR. The simulation results of the model are compared with the data of the PELE2 and Argonne tests, and reasonable agreements are observed between the model and test data.

Computer Simulation for Sodium-Concrete Reactions

Numerical Simulation of Sodium-Water Reaction Products Transport in Steam Generator of Liquid Metal Fast Breeder Reactor on Small Water/Steam Leak

Two-Phase Flow Simulation of Gas Entrainment Phenomena in Large-Scale Experimental Model of Sodium-Cooled Fast Reactor

Modification of RELAP/SCDAPSIM/MOD4.0 for Liquid Metal in Contact With Noncondensable Gas

Three Dimensional Numerical Simulation of Sodium Flowon Small Water Leak in Steam Generator of Fast Reactor

Three dimensional numerical simulation of sodium flow on small water leak in steam generator of fast reactor

Establishment of Sodium Boiling Model and Validation on BE+1 Experiment for Fast Reactors

A practical methodology devoted to pool‐type phenomena simulation in safety analysis for sodium‐cooled fast reactor

A Multiphase Numerical Simulation of Chloride Ions Diffusion in Concrete Using Electron Microprobe Analysis for Characterizing Properties of ITZ

Numerical Simulation of Steel Corrosion in Chloride Contaminated Concrete

Numerical Simulation of Chloride Penetration in Concrete in Rapid Chloride Migration Tests

Numerical simulation of external sulphate attack in concrete considering coupled chemo-diffusion-mechanical effect

Verification of the SAM Code by Means of the Method of Manufactured Solutions: Application to Molten Salt Reactor Multiphysics Simulation

Multi-phase Modelling of Electrochemical Rehabilitation for ASR and Chloride Affected Concrete Composites

Prediction of Sodium Boiling Caused by Total Blockage of a Single Subassembly Inlet in the Chinese Experimental Fast Reactor

Development and Application of Multi-Physics Safety Analysis Code for Advanced Liquid Metal Cooled Reactor

Development and Experimental Validation of a Heat Transfer Model for Spilled Molten Salt Pools

Research on CFD Calculation and Analysis Technology of Porous Media in Sodium Cooled Fast Reactor Core

Neutronics/Thermal-hydraulics Coupling Analysis for the Liquid-Fuel MOSART Concept

Coolant Boiling Numerical Simulation of Subassembly for Liquid Metal Cooled Fast Breeder Reactor

Prediction of sodium leakage droplet size distribution in sodium-cooled fast reactor loop