Abstract:Due to its advantages of high sensitivity and wide frequency response, the optical fiber interferometric method is admirably suited for the applications of dynamic measurement. In this paper, an optical fiber Michelson interferometer is used to realize non-contact micro vibration measurement. An optical fiber collimator emits a laser beam to the measured surface and receives the reflected laser beam. The optical path change of the reflected light from the measured surface is converted to phase change through the non-balanced interferometer. Due to the external environmental effect, the initial phase random drift of fiber interferometer occurs. So the amplitude fluctuations of the interference signal seriously affect the output signal to noise ratio of the fiber interferometer. Therefore, in order to get the true phase information from interference signal, an effective method of signal demodulation is necessary to eliminate the influence of the initial phase drift in the phase measurement. In this paper, the phase signal demodulation is realized with PGC(Phase Generated Carrier) method based on ARCTAN calculation. A large amplitude phase modulation signal beyond the frequency range of the detected signal is introduced in the PGC demodulation method. The desired phase result could be obtained through ARCTAN calculation with the quotient of two orthogonal signals. The PGC method based on ARCTAN calculation eliminates the influence of the signal amplitude drift. This scheme owns a better response characteristic for the abrupt signals. In this paper, a non-contact micro vibration measurement experimental system based on the non-balanced interferometer is implemented in the laboratory. The frequency response range of 1~1KHz and the displacement resolution of 1nm in vibration situation are realized.

Analysis on the Laser Self-Mixing Vibration Signal Transmitted Through Optical Fiber

A Study of Equal Optical Path in Low-Frequency Laser Vibration Measuring System

Experimental study of self-mixing vibration measurement using VCSELs

Self-mixing Interference Signal Analysis Based on Lissajous Figure Convergence Algorithm for Vibration Measurement

Optimization of the Laser Vibrometer Based on the Self-Mixing Effect in a Diode Laser

Micro-vibration measuring technology based on heterodyne interference

Research on Self-mixing Interference Effect and Micro-vibration Measurement of Semiconductor Laser at Moderate Feedback Condition

Self-mixing Interference Signal Analysis Based on Fourier Transform Method for Vibration Measurement

Waveform Distortion and Doppler Frequency Broadening of Self-Mixing Signal in Polymer Fiber Optic VCSEL System

Simulation of laser internal cavity length and refractivity dependence of self-mixing interference velometry

Self-mixing Velocimetry Based on Verical-Cavity Surface-Emitting Laser

Self-mixing velocimeter using an edge emitting laser

All-Fiber Configuration Laser Self-Mixing Doppler Velocimeter Based on Distributed Feedback Fiber Laser

Non-contact Micro Vibration Measurement System Based on Optical Fiber Michelson Interferometer

Laser Self-Mixing Interference Fibre Sensor

Distributed optical fiber sensing system based on semiconductor lasers with mutual unbalanced double optical injection

Self-mixing Interference Vibration Measurement Based on Even Equivalent Wavelength Fourier Transform Algorithm under Weak Feedback Regime

Laser Self-Mixing Interferometry for Micro-Vibration Measurement Based on Inverse Hilbert Transform

All-Fiber Laser-Self-Mixing Sensor for Acoustic Emission Measurement

Multiple Self-Mixing Interferometry Based on Lock-in Amplifier Analysis for Vibration Measurement

Coherent Laser Detection of the Femtowatt-Level Frequency-Shifted Optical Feedback Based on a DFB Fiber Laser