Abstract:As to minimize size of the measurement system of large size and ultra-long focal length lens, two mirrors are used to change light path. In this case, installation error of the two mirrors added may be a large obstacle to accurate measurement of ultra-long focal length lens. For the sake of analyzing how installation error of two mirrors infect the angle of Moiré stripes on receiver, Moiré stripes are understood as parallel lines which composed of point light source with certain light-path vector. This approach proposed uses the calculation formula from mirror deflection angle to the reflector unit normal vector, and the matrix form of the law of reflection, to calculate the relationship matrix from vector of incident light to vector of exit light. Based on unit normal vector of two mirrors, incident light-path vector, exit light-path vector, and analytic geometry, equation of line on which image of point light source place can be presented, so we can get the angle of Moiré stripes on receiver and so is the angle error caused by installation error of the two mirrors added into light path. In addition, the angle error of Moiré stripes is calculated theoretically in 49 different situations of small mirrors deflection smaller than 1 degree. The results indicate that the installation error of the two mirrors should be taken into consideration. A new method by using autocollimator to adjust the installation error of the two mirrors is proposed, installation error of the two mirrors can be controlled to lower than 1" through this method. Moiré stripes angle error should be better than (10-4) order of magnitude in this situation. Experimental results show that Moiré stripes angle measurement error is 0.005 degree, which fully illustrates the effect of mirrors adjustment when this system is used for the measurement of ultra-long focal length.

Finite Element Analysis Of The Mirror Room Of The 2-M Telescope

The Distortion in Fixing the Swing Mirror Bracket of the Space Solar Telescope

Stowing Distortion of Space Optical Tilt Mirror

An Overview of Radial Supporting Ways for Large-Size Movement Mirror: a Case Study of a Large-Aperture Rotating Prism

Analysis on mirrors installation error of high-accuracy long focal length measurement system

Design And Analysis Of Structure Of Large Aperture Three-Mirror Off-Axis Optical System

Design of biaxial flexural mount for a rectangular mirror with large aspect ratio of a space telescope

Simulation, Optimization and Measurement of MEMS Torsion Micro Mirrors for Optical MEMS Application

Design and Analysis of the Optical Structure for K Mirror in Astronomical Telescopes

Optomechanical analysis of the mounting performance of large laser transport mirrors

Optimal design and analysis of a space lightweight mirror with a directionally oriented 2.5D-CVT structure

The Design Of Support Structure Of Mirror Subassembly Of Space Remote Sensor

Modeling and Simulation of Two-Dimensional MOEMS Scanning Mirror

The Optimization Design of a Lightweight 2 m SiC Mirror for Ground-Based Telescopes

Thermal optimization of a high heat load liquid-metal-bath cooled mirror at the Hefei Advanced Light Facility

Towards Automatic Freeform Optics Design: Coarse and Fine Search of the Three-Mirror Solution Space

Surface Error Analysis of Large Reflecting Mirror under Assembly Fastening Forces

Flexible support structure design for optical mirror

Posture optimization of a 3-6R parallel mechanism for secondary mirror truss applied on large telescopes

Research on integrated design method of high-precision space-based active optical large-caliber splicing mirror drive and support

Research on Degree of Freedom of Secondary Mirror Truss Mechanism Based on Screw Theory and Geometry Algebra Applied on Large Telescopes