Abstract:Permanent deformation is a long-term irrecoverable depression accumulated in the wheel path when the flexible pavement is subjected to heavy loads at high temperature, which can be simulated using the vertically loaded wheel test (VLWT) in the laboratory. The objective of this study is to develop a new approach to analyze the vertically loaded wheel test results based on the elastic-viscoelastic correspondence principle. The energy-based pseudo variables are proposed to perform rutting evaluation of asphalt mixtures in the VLWT.Four types of styrene-butadienestyrene modified asphalt mixtures were prepared to conduct the undamaged compressive dynamic modulus test at different temperatures. Then the master curves of dynamic modulus for these mixtures were converted to get the relaxation modulus. The innovative VLWT for four types of two-layer structure with different asphalt mixture combinations were performed to investigate the rutting development. After that, a new mechanical-empirical rutting prediction model was introduced to predict the rutting development for each layer in the two-layer structure. The energy-based pseudo variables including pseudo strain, pseudo strain rate and dissipated pseudo strain energy (DPSE) were introduced to correlate with the rutting resistance.The results show that the developed mechanical-empirical rutting prediction model is proficient in capturing the rutting development of a two-layer structure of asphalt mixtures measured by a vertically loaded wheel tester. The rutting contributions of the top and bottom layers can be separated using this model. Compared with the total strain, the pseudo strain which removes the viscoelastic effect, is more accurate to evaluate the permanent deformation in a cyclic loading condition. The DPSE increases with the increase of loading cycles and rut depth. Two typical stages with an inflection point can be observed from the test results which indicate that the faster to reach the inflection point, the better rutting performance will be achieved.

EXPERIMENTAL STUDY AND NUMERICAL ANALYSIS OF THE RUTTING PROBLEM OF AN ASPHALT PAVEMENT

Evaluation of Rutting Potential of Flexible Pavement Structures Using Energy-Based Pseudo Variables

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Study of Rutting Mechanism of Asphalt Pavement

Rutting Mechanism Analysis Of Heavy-Duty Asphalt Pavement Based On Pavement Survey, Finite Element Simulation, And Instrumentation

Investigation on the Micro Deformation Mechanism of Asphalt Mixtures under High Temperatures Based on a Self-Developed Laboratory Test

Rutting Resistance Evaluation of Structural Combinations of Asphalt Pavement Subjected to Heavy Duty

Analysis of primary influencing factors and indices distribution law of rutting performance of asphalt mixtures

Evaluation of factors that affect rutting resistance of asphalt mixes by orthogonal experiment design

Comparative analysis of pavement performance characteristics of flexible, semi-flexible and rigid pavement based on accelerated pavement tester

A Design Method on Durable Asphalt Pavement of Flexible Base on Anti-Rutting Performance and Its Application

Development and verification of rutting prediction model based on variable frequency load test

Finite element analysis of rutting on full depth asphalt pavement in port area considering temperature field

Analysis of Formation Mechanism and Main Influence Factors of Rutting of Asphalt Concrete Pavement

Permanent Deformation Monitoring and Remaining Life Prediction of Asphalt Pavement Combining Full-Scale Accelerated Pavement Testing and FEM

Similarity Analysis of Rutting Test

Modeling of Rutting in Asphalt Flexible Pavement

Similarity Analysis of Rutting Test for Asphalt Pavement Based on Similarity Theory

A new paradigm to explain the development of instability rutting in asphalt pavements

Assessing the impact of volumetric mix-design parameters and compaction levels on rutting performance of asphalt pavements: a comprehensive analysis

Development of Rutting Forecasting Models for Distinct Asphalt Pavement Structures in RIOH Testing Track Using Different Approaches