Abstract:Based on the most recently published mass transfer model of volatile organic compound (VOC) emissions from dry building materials, it is found that the dimensionless emission rate and total emission quantity are functions of just four dimensionless parameters, the ratio of mass transfer Biot number to partition coefficient (Bim/K), the mass transfer Fourier number (Fom), the dimensionless air exchange rate (Nδ2/Dm) and the ratio of building material volume to chamber or room volume (Aδ/V). Through numerical analysis and data fitting, a group of dimensionless correlations for estimating the emission rate from dry building materials is obtained. The predictions of the correlations are validated against the predictions made by the mass transfer model. Using the correlations, the VOC emission rate from dry building materials can be conveniently calculated without having to solve the complicated mass transfer equations. Thus it is very simple to estimate VOC emissions for a given condition. The predictions of the correlations agree well with experimental data in the literature except in the initial few hours. Furthermore, based on the correlations, a relationship between the emission rates of a material in two different situations is deduced. With this relationship, the results for a given building material in a test chamber can be scaled to those under real conditions, if the dimensionless parameters are within the appropriate region for the correlations. The relationship also explicitly explains the impacts of air velocity, load ratio, and air exchange rate on the VOC emission rate, which determines the feasibility of assuming that the VOC emission rates in real conditions are the same as those in the test chambers.

Applying dimensionless correlations to VOC emissions from dry building materials

Dimensionless correlations to predict VOC emissions from dry building materials

Dimensionless Correlations For Voc Emissions From Dry Building Materials And Their Applications

Characteristics and Correlations of VOC Emissions from Building Materials

Analytical solution and dimensionless correlations for VOC emissions from dry building materials in static chamber

An improved mass transfer based model for analyzing VOC emissions from building materials

A new mass transfer based model of VOC emissions from building materials

Characterisation of VOC and Formaldehyde Emission from Building Materials in a Static Environmental Chamber: Model Development and Application

A General Model for Analyzing Single Surface VOC Emission Characteristics from Building Materials and Its Application

A new method of measuring VOC emission characteristics of dry building materials

General Analytical Mass Transfer Model for VOC Emissions from Multi-Layer Dry Building Materials with Internal Chemical Reactions

Association Between the Emission Rate and Temperature for Chemical Pollutants in Building Materials: General Correlation and Understanding.

A Mass Transfer Model for Simulating VOC Sorption on Building Materials

A general analytical model for formaldehyde and VOC emission/sorption in single-layer building materials and its application in determining the characteristic parameters

An Analytical Mass Transfer Model for Predicting VOC Emissions from Multi-Layered Building Materials with Convective Surfaces on Both Sides

A General Model For Analyzing Voc Emissions From Multi-Layer Dry Building Materials With Double Emission Surfaces

New method for determining VOC emission parameters for dry building materials

Study on Temperature Influences on VOC Diffusion Coefficient of Porous Building Materials

Influence Of Precision Of Emission Characteristic Parameters On Model Prediction Error Of Vocs/Formaldehyde From Dry Building Material

Numerical simulation of VOC emissions from dry materials

Correlation between the solid/air partition coefficient and liquid molar volume for VOCs in building materials