Abstract:Reverse engineering technology has been widely recognized as a crucial strategy for innovative design of products. However, currently one of major problems for its application is that huge amounts of digitized points cloud data need to be processed for geometrical surface modelling, especially for unknown free-form surfaces which are widely used in industry fields such as aircraft, automobile, shipbuilding, steam turbine, etc. In order to digitize unknown free-form surfaces accurately and efficiently, an adaptive sampling approach based on advanced path detecting has been presented. The method is characterized by integrating one touch- trigger probe and two laser probes onto the same Z axis of Coordinate Measuring Machine (CMM), and the two laser probes are located on both sides of the touch probe. During sampling, the CMM scans the free-form surface line by line. At the scanning direction, the laser probes are applied to collect the measuring path information in front of the touch probe. And the data acquired by the laser probes is processed and fitted into B-spline curves real-timely, and then the curvature feature of the measuring path is extracted. The obtained path information is used to generate a new measuring path for touch probe to achieve adaptive sampling. While at the cross-section feeding direction, curvature analysis algorithm based on the angle variation between measuring sections is employed to subdivide the cross-sections when needed. Repeating this procedure, the measuring sections will be distributed adaptively. Simulation and experiment results indicate that the sampling points generated by the touch probe are laid out rationally according to the curvature of the surfaces, therefore the sampling efficiency and accuracy can be improved significantly by the proposed approach.

Extracting Characteristic Points Of The Surfaces Without A Support Threshold

Research on Extraction of Characteristic Point of Combined Surface Based on Outlier Detection Algorithm

An Adaptive Sampling Approach for Digitizing Unknown Free-form Surfaces Based on Advanced Path Detecting

A Novel Pointcloud-Based Isosurface Extraction

Research on Ultrasonic Detection of Complex Surfaces

Algorithm of Real-Time Path Generation for Ultrasonic Inspection of Sculptured Surface

Research on the non-contact measurement of unknown freeform surface and determining its key geometric characteristics

Research of surface reconstruction and path generation by ultrasonic inspection

Surface Extraction and Boundary Detection Based on DBSCAN Clustering in 3D Point Clouds

Surface Reconstruction From Contours Based On Fast Calculation Of Distance Field

Feature Surface Extraction and Reconstruction from Industrial Components Using Multistep Segmentation and Optimization

Hybrid Dimension Based Modeling of Part Surface Topography and Identification of Its Characteristic Parameters

Efficient cutting area detection in roughing process for meshed surfaces

Surface Characteristic Profile Extraction Based on Hilbert–Huang Transform

Intersections of Two Offset Parametric Surfaces Based on Topology Analysis.

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined

Three-dimensional point cloud data subtle feature extraction algorithm for laser scanning measurement of large-scale irregular surface in reverse engineering

Extraction of Blend Surface Feature in Reverse Engineering

A Fast Progressive Surface Reconstruction Algorithm for Unorganized Points

3D Surface Segmentation from Point Clouds Via Quadric Fits Based on DBSCAN Clustering

Parametric Surfaces Intersection Algorithm Based on Discrete Surfels