Abstract:This paper deals with the initial shape analysis, cutting-pattern analysis, surface accuracy measurement and modal testing of high-precision inflatable antennas reflectors that are intended for spaceflight applications. The initial shape analysis method, formulated on the basis of membrane theory and elastic mechanics, determines the required as-manufactured shape of the reflective surface of the antenna reflector. On the other hand, the cutting-pattern analysis method, with its formulation based on spring-mass representations, numerically calculates the required cutting pattern of the planar membrane gores that are to be assembled to form the 3-dimensional reflective surface. To validate the effectiveness of the proposed analysis methods, a 3.2-m antenna reflector model was designed, manufactured, and assembled for ground demonstration and testing. The reflective surface accuracy of this demonstration reflector model was measured by a photogrammetric measuring system. Shape adjustments of the reflective surface were performed by systematically adjusting the tension in the cables that were used to mount the reflector to its support structure. It was found that the reflective surface accuracy of the reflector model, as defined by its RMS error from a best-fit parabolic shape, was less than 1mm. In addition, dynamic and RF tests were also performed on the demonstration reflector model. The test results indicated that the first-mode frequency of the reflector model agreed well with the corresponding analytical prediction, and its radiation pattern was also well focused.

Optimum Design for Optical Antenna of Space Laser Communication System

Design of Collimation System in Space Laser Communication

Optimization of Inter-satellite Laser Communication Links

Structure design and mechanical measurement of inflatable antenna

Optimized Design of W-Band Quasi-Optical Lens by Using Optical Simulator and Numerical Analysis

Optical Lens and Software Design Research Based on Atmosphere Optical Communication System

Design of a dual hollow beam optical antenna based on a Fresnel lens-conical lens combination

Optimization Design Of Spectrum Analysis Optical Systems

Optimization method to eliminate the influence of the conical acoustic lens on the transmission of laser beam using ZEMAX

Research on the Design of Kepler Refractive Shaping System with the Long Working Focal Depth

Design of a calibratable optical antenna system based on ring array light source

Efficient Optimal Design of Smooth Optical Freeform Surfaces Using Ray Targeting

Design of Transmitting Optical Antenna of a Terrestrial Line-Sight Optical Communication

Structure Design and Finite Element Analysis of Receiving System for Optical Communication

Potential application of diffractive optical elements in satellite laser communication terminals

Design and Alignment of Off‐axis Reflection Beam Expanding and Contracting Optical System

Multiobjective optimization and design of a luneberg lens antenna with multiband multi-polarized feed-system

Optimal design of small aperture optical terminals for free-space links

Optical Design for 1.2 m Quantum Communication Tracking System

Impact of an axial non-confocal antenna on the on-orbit lasercom receiver analyzed by the simplified combination method of ray tracing and diffraction theory

Initial configuration design method for off-axis reflective optical systems using nodal aberration theory and genetic algorithm