Abstract:Compliance control is required in the applications of robots for assembling, grinding, polishing and human-robot interface, which needs both position control and force control of robots. The impedance control based on joint torque servo is a promising and practical method to realize compliance control in industrial applications. The performance of a joint torque servo controller is thus crucial to the success of compliance control. However, both nonlinear friction torque of the joint motor and varied dynamics of environmental contact during manipulation increase control difficulty greatly. This paper focuses on the compliance control problem and presents a new joint torque servo controller which is a cascading structure including an inner velocity feedback loop and an outer torque control loop. Due to the high signal-to-noise ratio of the motor velocity, an extended state observer is designed to effectively estimate and compensate for the motor friction torque, varied dynamics of environmental contact and other unknown disturbance. And benefiting from the introduction of the efficient and powerful velocity inner loop, the new torque controller performs very well not only in the rigid but also elastic contact environment. Then a standard PD controller is designed in the outer torque loop to produce the control law. Based on the satisfactory joint torque controller, a simplified impedance control algorithm is designed to achieve the force control. Experiments with three other joint torque controllers on a robot manipulator are conducted to demonstrate the proposed joint torque method and the overall force control framework. These results show the proposed joint torque controller can reduce the steady-state error from 3.07 Nm to 0.21 Nm which indicates the joint actuator friction can be eliminated by more than 99%. And a substantial improvement can also be observed in the experiments of force control based on the new joint torque controller.

On Compliant Force Control Based on Inner Position Loop

Synthesis Methods and Experiment Validation of Compliant Force Controller Based Inner Position Loop.

The Force Control Method Based on 6-DOF Parallel Electro-hydraulic Servo Mechanism

Compliance Control for Standing Maintenance of Humanoid Robots under Unknown External Disturbances.

μ-Based Theory in Compliant Force Control for Space Docking.

APPLICATION OF Μ THEORY IN COMPLIANT FORCE CONTROL

<inline-formula> <tex-math notation="LaTeX">$\mu$ </tex-math></inline-formula>-Based Theory in Compliant Force Control for Space Docking

Decoupled Adaptive Terminal Sliding Mode Control Strategy for a 6-DOF Electro-Hydraulic Suspension Test Rig with RBF Coupling Force Compensator

Robust Force Tracking Impedance Control of an Ultrasonic Motor-actuated End-effector in a Soft Environment.

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Hybrid Motion/Force Control of the Hydraulic Cooperative Manipulator in Constrained Motion

Cooperative compliance control of the dual-arm manipulators with elastic joints

Compliance Control for Robot Manipulation in Contact with a Varied Environment Based on a New Joint Torque Controller

Coordinated compliance control of dual-arm robot for payload manipulation: Master-slave and shared force control

Task-Oriented Adaptive Position/Force Control for Robotic Systems Under Hybrid Constraints

Two-degree-of-freedom internal model position control and fuzzy fractional force control of nonlinear parallel robot

Guarding Force: Safety-Critical Compliant Control for Robot-Environment Interaction

A practical PID variable stiffness control and its enhancement for compliant force-tracking interactions with unknown environments

Compliant Coordination Control of Two Moving Industrial Robots

Impedance-Sliding Mode Control With Force Constraints for Space Robots Capturing Non-Cooperative Objects

Neural Network-Based Position Synchronised Internal Force Control Scheme for Cooperative Manipulator System