Abstract:Optical fiber grating (FBG) has been widely used in the measurement of parameters such as temperature and strain. However, FBG is too slim to broken, whose outside protective layer tends to shedding easily, and it is also hard to change the temperature and strain sensitivity. In order to overcome the above disadvantages and to further expand the application range of FBG, this paper improves the technology of fiber grating metal film plating process firstly. It adopts a compositive method including chemical plating and electroplating to gild FBG, copper FBG and galvanize FBG, which all get good metal coating. Then, the temperature and strain sensing properties of metalized FBG is studied in detail. Multiple metal coating FBGs were put in high-low temperature test-box together, and then the test-box worked continuously at the temperature range of 0 degrees C similar to 95 degrees C After several experiments, it concludes that metal plating enhances the temperature sensitivity of fiber grating, and the one with galvanization has the highest temperature sensitivity of 0.0235. At last, FBGs with various cladding were pasted on carbon fiber cantilever beam respectively and the pressure on the top of the cantilever increased gradually. The experimental results show that wavelength of fiber grating shift toward the long wavelength with the increase of the pressure, and the one with galvanization has the maximum strain sensitivity which has minimal impact on fiber properties.

Experimental Study of Sense Characteristic Based on Metalized Package Fiber Bragg Grating

Study of Sensing Properties and Contrastive Analysis of Metal Coating Optical Fiber Grating

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Temperature Sensing of Metal-Coated Fiber Bragg Grating

Metal Coating of Fiber Bragg Grating and the Temperature Sensing Character after Metallization

Capillary Encapsulating of Fiber Bragg Grating and the Associated Sensing Model

Study on the Strain and Temperature Densing Characterist ics of FBG Packaged by the Copper slice

Effect of metalizing nickel on the spectrum of fiber Bragg grating

An Electroplating Method for Surface Mounting Optical Fiber Sensors on the Metal Substrate

Experiment on Embedding FBG Sensor into Intelligent Metal Structures

The Improvement of Temperature Sensitivity by Eliminating the Thermal Stress at the Interface of Fiber Bragg Gratings

The Research for Embedding Optical Fiber Bragg Grating in the Steel Beam and the Sensing Properties

A study of the temperature sensitivity of fiber Bragg gratings after metallization

Study on Experiment of Fiber Bragg Grating Pressure Sensitivity

Studies on High-Sensitivity Hydrostatic Pressure Sensor Using Fiber Bragg Grating

A Novel Fiberg Grating Sensing and Demodulating System with Temperature Compensation

A Method of Strain Measurement Based on Fiber Bragg Grating Sensors

Research on sensitized Fiber Bragg Grating temperature sensor based on bimetal three-substrates

Simultaneous Independent Temperature and Strain Measurement Using One Fiber Bragg Grating Based on the Etching Technique

Fiber Bragg grating temperature sensor for marine application

A novel integrated sensing structure based on double quartz tubes stepped fiber grating and its theoretical study on temperature sensing performance