Abstract:Conventional distributed actuators laminated on shells and plates usually only introduce uniform control forces and moments. Structural actuation and control based on uniform control forces and moments have been investigated for over two decades. This study is to exploit a new actuator design, i.e., a skew-quad (SQ) actuator system made of piezoelectric and photostrictive materials. This new actuator system composed of four regions can induce non-uniform control forces and moments owing to the uneven boundary conditions of each region. The non-uniform distribution of actuator induced forces and moments are defined based on the variation method and validated by ANSYS. The coupling equation of a simply supported plate laminated with the piezoelectric SQ actuator is derived. Distributed control action resulting from the non-uniform control moments is also defined in the modal domain. Control actions of center-placed and corner-placed actuators on a square plate are defined and compared. Furthermore, wireless non-contact actuation of cylindrical shells coupled with the center-placed and corner-placed photostrictive SQ actuator systems are evaluated respectively. The modal control actions change with respect to the modes and the actuator coverage and thus, the actuator size and location are very important to the modal control effectiveness. In order to improve the control actions of the SQ actuator system, control schemes are designed for piezoelectric and photostrictive SQ actuator system respectively to regulate the sign of control forces of each region and to improve actuation effectiveness.

Study on optimal placement for piezoelectric smart flexible cantilever plate

OPTIMAL PLACEMENT OF PIEZOELECTRIC TORSIONAL ACTUATOR/SENSOR BASED ON SMART BAR

Optimal Distribution Of Actuator/Sensor In Piezothermoelectric Intelligent Structure

Optimal placement of piezoelectric torsional actuator based on genetic algorithm

Optimal Control Of Piezoelectric Laminated Parabolic Cylindrical Panels

Optimal Control of Clamped-Free Conical Shell Using Diagonal Piezoelectric Sensor and Actuator

Microscopic actuation and optimal actuator locations of paraboloidal cylindrical shells

Optimal Disposition of Sensors/Actuators for Flexible Structure with Close Modes

Optimum disposition of sensor/actuator for active vibration control of flexible structure

Distributed piezoelectric sensor/actuator design for dynamic measurement/control of distributed parameter systems: A piezoelectric finite element approach

Multi-mode Vibration Averagely Control for Cylindrical Shells by Optimally Distributed Piezoelectric Sensors and Actuators

Actuator Placement Optimization For Piezothermoelectric Biotic Thermal Robust Structure

Non-Uniform Actuations Of Plates And Shells With Piezoelectric And Photostrictive Skew-Quad Actuator Designs

Study on Placement Optimization of Piezoelectric Torsional Actuator/Sensor in Flexible Bar System

Vibration Control of Plates Using Discretely Distributed Piezoelectric Quasi-Modal Actuators/sensors

Optimal Configuration of Sensors and Actuators for Vibration Control of Cantilever Plate

Non-Uniform Control Moments Induced By A Skew-Quad Actuator Design Applied To Plate Controls

Distributed Multi-Flexoelectric Actuation and Control of Plates

Active vibration optimal control of piezoelectric cantilever beam with uncertainties

Active Vibration Control of Piezoelectric Sandwich Plates

Active Control of a Plate Using Segmented Distributed Sensors and Actuators: Finite Element Development and Analysis