Eexperimental study on the hysteretic behavior of full-scale spacial steel frames composed of non-compact members

Chen Yiyi,Wu Xiangxiang,Tian Hai,Tong Lewei

DOI: https://doi.org/10.3321/j.issn:1000-131X.2006.05.008

2006-01-01

Abstract:Two full-scale spatial steel frames were tested under vertical and cyclic horizontal loads. The frame members are H-shaped steel elements of large width-to-thickness ratios. Testing results show that the width-thickness ratio and the ratio of axial force at columns are the key factors influencing the structural performance of a steel frame (imposed of members with non-compact elements. It is also shown that structural failure commences with the local buckling at the end of members, which also causes the loss of ductility and energy-dissipating ability of the structure. Based on the analysis of seismic capacity of the specimen, a design concept considering the special features of this type of frames is proposed, i.e. for the sake of the safety in rarely occurred earthquakes, the required resistance of the frame should be kept at a relatively high level as opposed to frequently occurred earthquakes. Test results indicate that the frames meeting the aforementioned requirement have sufficient stiffness and deformation capacity to satisfy the different deformation demands for seismic actions at different hazard levels. Numerical analyses are in good agreement with the experimental measurements.