Abstract:The propagation of laser beam in inter-satellite laser communications belongs to the far-field diffraction, but in the optical test and verification of pointing, acquisition and tracking (PAT) function on the laboratory the beam from a terminal propagates within the near-field. In this paper, in terms of the Fresnel diffraction theory the inherent difference is found that in the far-field diffraction the optical tracking position error is resulted from both the mutual movement between two laser communication terminals and the tilting of the receiver terminal, but the tilting of the transmitter has no effect on the error position; and that in the near-field diffraction the position error is caused by the tilting of the transmitter or the receiver, but the mutual movement has no effect. It is furthermore found that the use of a beam scanner in the test in the near-field can simulate exactly the mutual movement of satellites in the far-field, and the trajectory formula for the beam scanning is deduced that is the same as the mutual angular trajectory from one satellite to another. Therefore a practical PAT test bed of a double-focus laser collimator, a beam scanner and a fine beam steering device is developed by us to test and verify the PAT function of inter-satellite laser communication terminals. The optical aperture is about phi 440mm for this use. And a test bed for concurrent test and verification of both PAT function and communication performance is also demonstrated. The test bed consists of a conventional laser collimator, an optical scanner and a far-field beam transmission simulator, which is a combination of a Fourier-transform lens an a followed multiple-stage imaging amplifier. The details of configurations are given. It is clear that these test beds can be also used to test and verify the functions of laser radar, passive optical tracker, and so on.

Design Principle of Performance Testing Device for Laser Beam Microradian Pointing and Tracking in Intersatellite Laser Communications

High-precision laser alignment technique based on spiral phase plate

Double-prism Scanner for Testing Tracking Performance of Inter-Satellite Laser Communication Terminals

Optical-mechanical-thermal Analysis on Prism Assembly of Precision Light Beam Scanner

Pointing and tracking errors due to low-frequency deformation in inter-satellite laser communication

Intelligent Measuring System for Performance Parameters of Laser Range Finder

Research on A Scanner for Tilting Orthogonal Double Prisms

Experiment Research on Orthogonal Tilting Scanner

Design and Analysis of High Accuracy Light Beam Deflection Device

Physical basis and corresponding instruments for PAT performance testing of inter-satellite laser communication terminals

Investigation of Inverse Solutions for Tilting Orthogonal Double Prisms in Laser Pointing with Submicroradian Precision

Assembly Error Analysis of Laser Tracking Steering Prisms with Sub-microradian Order Accuracy

Design of an Optical Testbed for In-Lab Testing and Validation for the Intersatellite Lasercom Terminals

Performance Characterization of Scanning Beam Steered by Tilting Double Prisms.

Large-aperture Laser Beam Scanner for Inter-Satellite Laser Communications Ground Test: Assembly and Test

Laser Coarse-Fine Coupling Scanning Method by Steering Double Prisms

A New Composite Spiral Scanning Approach for Beaconless Spatial Acquisition and Experimental Investigation of Robust Tracking Control for Laser Communication System with Disturbance

Large-aperture High-accuracy Optical Scanner

A Novel Combined Laser Tracking Mechanism

Optimization design of multi-sided reflecting prism in laser line scanning imaging system

Pointing and Tracking Errors Due to Localized Deformation in Inter-Satellite Laser Communication Links