Abstract:A series of triggering experiments was carried out to investigate the characteristics of vacuum arc controlled by TMF/RMF-AMF contacts. During all the experiments, the current ranged from 5-20 kA (rms) and both the arc appearance and behavior of cathode spots were captured by high-speed camera with corresponding arc current and arc voltage. A 3D steady magnetohydrodynamics (MHD) model was built to simulate and analyze the vacuum arc behavior under TMF/RMF-AMF contacts, and arc plasma parameters were calculated based on the above model. The experimental results showed that arc deflection was visible under both low and high current. Under high current, arc core formed, which meant the arc contracted significantly. In addition, the anode became much more active under high current. The behavior of the cathode spots showed that they split themselves into other new cathode spots. Under high current, the bulk of the spots rotated along a clockwise direction on a transverse magnetic field (TMF) plate, which caused much noise and oscillation in the arc voltage. The simulation results show that ions are likely to gather on the branches of the TMF plate on the anode plane, as a result of the effects between the electromagnetic force and pressure gradient of the arc plasma. The current contracts in the center of the TMF plate on the cathode which was due to the thin connecting rod there. The anode contraction of the current is caused by the Hall effect. Ions move along a clockwise direction on the TMF plate, which is driven by Ampere force. The current contraction resulted in significant melting in the center of the cathode surface while the other region suffered from uniform melting. The melting caused by the anode contraction is more significant than that of the cathode.

Experimental investigation on the arc modes transition of the AMF electrode with one turn coil structure

Experimental Investigation on the Vacuum Arc Behaviors of the Axial Magnetic Field (AMF) Electrode with Single Coil Structure

Influence of Gap Distance on the Arc Modes Transition of Cup Type AMF Electrode

Investigation of Arc Ignition Modes for Drawn Vacuum Arc with Axial Magnetic Field (AMF)

Research on Vacuum Arc Characteristics of a New Electrode Structure Applied in High Voltage Vacuum Interrupter

Influence Mechanism of Cathode Materials on the Transition Process of Arc Modes in Drawn Vacuum Arcs under External AMF

Study of Mode Transition of Long Gap Vacuum Arc

Influence of Gap Distance on the Arc Behaviors of Slot Type Axial Magnetic Field (AMF) Electrode

The Discharge Development and Arc Modes in Vacuum at A Long Gap Distance in Vacuum Interrupters

Experiments and Simulation Research of Vacuum Arc with TMF-AMF Contact

Experimental Investigation of Arc Ignition Modes of Vacuum Arc under Transverse Magnetic Field

High-Current Vacuum Arc Mode Transition of a Horseshoe-Type Axial Magnetic Field Contact with Long Contact Gap

Experimental Investigation on Vacuum Arc Behaviors Subjected to Larger Diameter Cup-Shaped and Coil-Shaped Axial Magnetic Field Electrode

The Experimental Study of Long-Gap Vacuum Arc

The Influence of Ignition Position on Arc Characteristics in the Transition Mode of a Drawn Vacuum Arc in Cup-Shaped AMF Contacts

The Characteristics of Vacuum Arc in the Process of Transition to Diffuse Mode under Transverse Magnetic Field

Experimental Investigation and Numerical Simulation of Triggered Vacuum Arc Behavior under Tmf/Rmf-Amf Contact

Influence of Axial Self-magnetic Field Component on Vacuum Arc Transition to Diffuse Mode of Transverse Magnetic Field (TMF) Contacts

Simulation Researches of Vacuum Arcinitial Diffusion Process Under Two Kinds of Axial Magnetic Fieldelectrodes

Experimental Investigation on the Initial Expansion Process in a Drawn Vacuum Arc and the Influence of Axial Magnetic Field

Experimental Investigation of High-Current Vacuum Arc Instability Modes under Transverse Magnetic Field