Abstract:Non‐isothermal elongational flow promotes the achievement of enhanced nanofiller dispersion and improved tensile properties in LDHs‐containing nanocomposites. In this work, the effect of the non‐isothermal elongational flow on the morphology and mechanical properties of polypropylene (PP)‐based nanocomposites containing Mg‐Al layered double hydroxides (LDHs) modified with stearate or oleate functional groups has been investigated. In particular, nanocomposites containing 5 and 10 wt% of LDHs prepared through melt compounding were subjected to uniaxial elongational flow at the exit of the extruder, leading to the formation of fibers characterized by different draw ratios (DRs). The mechanical characterization of the fibers demonstrated a progressive enhancement of the tensile strength as a function of the DR with increasing the content of nanofillers. Notably, for the fibers stretched at a DR of 200 and containing 10 wt% of LDHs modified with oleate groups, the tensile strength increased fourfold as compared to that of the unfilled matrix. These results have been attributed to a progressive enhancement of the extent of the dispersions of the embedded LDHs induced by the application of the elongational flow, as also confirmed by morphological analyses. In all, the obtained results demonstrated the beneficial effect of the elongational flow in promoting the achievement of superior mechanical properties in LDHs‐containing nanocomposites, hence widening the application field of these nanostructured materials. Highlights PP/organomodified LDH nanocomposites were obtained through melt compounding. Nonisothermal elongational flow was applied to the extrudates at the die exit. Anisotropic fibers showed progressively enhanced tensile strength values. Elongational flow promoted a gradual evolution of the material microstructure. A gradual improvement of the nanofiller dispersion was observed upon elongation.

Effect of Flow Field on Online Shear Viscosity of PP/nano-CaCO3 Composites

Effects of Periodic and Non‐periodic Chaotic Mixing on Morphology Development of Immiscible Polymer Blends

Sliding Behaviour of Carbon Nanothread Within a Bundle Embedded in Polymer Matrix

Microphase Transitions of Block Copolymer/nanorod Composites under Shear Flow

Phase Behaviors of Diblock Copolymer/nanorod Composites under Oscillatory Shear Flow

Rheological Properties of Neat and Calcium Carbonate Particles Filled Polypropylene Blends under Axial Vibration Force Field

Influence of Reduced Graphene Oxide on the Rheological Response and Chain Orientation on Shear Deformation of High Density Polyethylene

Effect of high‐shear mixing by twin‐screw extruder on the dispersion and homogeneity of polyacrylonitrile/carbon nanotube composite solution

Rheological mechanism of polymer nanocomposites filled with spherical nanoparticles: Insight from molecular dynamics simulation

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

Concurrent effect of shear flow and CNT presence on crystallization behavior and electrical properties of polypropylene based nanocomposites: A comprehensive structure-property investigation

Effect of hydrophobic nano‐silica/β‐nucleating agents on the crystallization behavior and mechanical properties of polypropylene random copolymers

Elongational flow‐induced microstructure evolutions in polypropylene/layered double hydroxides nanocomposites

More Dominant Shear Flow Effect Assisted by Added Carbon Nanotubes on Crystallization Kinetics of Isotactic Polypropylene in Nanocomposites

Rheology, Morphology and Thermal Properties of a PLA/PHB/Clay Blend Nanocomposite: The Influence of Process Parameters

Exploring Effects of Graphene and Carbon Nanotubes on Rheology and Flow Instability for Designing Printable Polymer Nanocomposites

STUDIES ON INFLUENCES OF VISCOELASTIC PROPERTIES ON MELT EXTRUSION OF CARBON NANOTUBES-FILLED ISOTACTIC POLYPROPYLENE COMPOSITES

Enhancing a Multi-Field-synergy Process for Polymer Composite Plasticization: A Novel Design Concept for Screw to Facilitate Phase-to-phase Thermal and Molecular Mobility

The interplay of thermodynamics and shear on the dispersion of polymer nanocomposite

Effect of different compatibilization routes on the mechanical, thermal and rheological properties of polypropylene/cellulose nanocrystals nanocomposites

Impact of hybrid nanofillers on the structure and property of polypropylene/polystyrene composites based on elongation flow