Abstract:Flow fields can enhance the peak power density of redox flow batteries through distributing the electrolyte and thus reactants uniformly in the porous electrode. However, due to the distinct mechanisms of serpentine and interdigitated flow fields for mass transfer enhancement, the effectiveness of different flow fields is highly dependent on design and operating parameters of the flow cell, such as electrode material, channel's dimension, applied flow rate, and applied current density. The significant computational costs induced by the 3-D or 2-D numerical model on the one hand, and the demand for a deep understanding with respect to the effects of the different flow fields on the flow cell under varying geometric and operating conditions on the other hand, call for an analytical approach. Therefore, the present study establishes an analytical model for quantifying the mass transfer and the electrochemical overpotentials in the flow cell with the serpentine or the interdigitated flow fields. The validity of the analytical model is confirmed by comparisons with experimental and 3-D numerical simulation results under varying electrode materials and channel dimensions. Parametric study results show that the properties changes affect the flow cell implemented with different flow fields paradoxically. First, for the flow cell utilizing electrodes corresponding to a relatively high specific surface area and a low permeability, the interdigitated flow field is more worthy of recommendation, while as the permeability of the electrodes increases, the serpentine flow field becomes more competitive. Second, widening channel's and rib's widths is an effective approach to decrease the concentration overpotential for the interdigitated flow field, while its effects on that with the serpentine flow field is opposite. These results are expected to provide a valuable guidance for the application of interdigitated and serpentine flow fields in flow cells.

Simulation of Coupled Electric-Magnetic-Flow Fields in an Aluminum Reduction Cell

Numerical Simulation of Flow Batteries Using a Multi-scale Macroscopic-Mesoscopic Approach

Simulation and Analysis of Magnetic Fields and Flow Fields of Metal Pad in 75 Ka Drained Style Aluminum Reduction Cell

An Analytical Model for Parametric Study on Serpentine and Interdigitated Flow Fields in Redox Flow Batteries

Finite element analysis of magnetohydrodynamics stability of an aluminlium reduction cell

Model-based Optimization for Combined Interdigitated and Serpentine Flow Field in Redox Flow Batteries

Numerical Simulation Study on Gas Collecting System of 400 kA Grade Aluminum Electrolytic Cell

Phase-Field Simulation Studies of Dendrite Growth Coupling with Force Flow Field

Numerical Simulation of Magnetic Field Distribution in Aluminum Melting Furnace with Electromagnetic Stirring

Electromagnetic Field and Temperature Field Analysis of Coil Type Lead-Bismuth Electromagnetic Flowmeter

A Method Based on Measured Boundary Conditions for Reconstructing the Magnetic Field Distribution of an Electromagnetic Mechatronic System

Analysis of anode current distribution in aluminum electrolysis cell based on equivalent circuit numerical simulation

Mode Coupling Analysis of Interfacial Stability and Critical Anode–Cathode Distance in a 500-kA Aluminum Electrolysis Cell

Numerical investigation on the feasibility of metal foam as flow field in alkaline anion exchange membrane fuel cell

Numerical Simulation of Three-Dimensional Electric Field of High Current Rare Earth Electrolytic Cell

Numerical Simulation on Magnetic Flux Density in Direct Current Electromagnetic Pump

Calculation of the ion flow field of AC-DC hybrid transmission lines

Simulation of the Aluminum Electrolysis Process in a High-Current Electrolytic Cell in Modern Software

Improved CFD Modeling of the Whole-Cell Side Ledge Behavior in Aluminum Electrolysis Cell

Numerical Simulations and Thermal Diagnostic of Ledge Formation in Hall–Heroult Aluminum Electrolysis Cell with a Solidification Front at the Cryolite-Metal Baths Interface for Reduction of Heat Losses

Numerical Simulations in a Three-dimensional Model of Direct Methanol Fuel Cell Anode Using Computational Fluid Dynamics Method