Abstract:For airborne repeat-pass synthetic aperture radar interferometry (InSAR), residual motion errors (RMEs) exist between the true and measured trajectories due to the inaccuracy of current navigation systems. In addition, a global unknown phase ambiguity (PA) exists in the unwrapped phase due to the error of absolute phase estimation. The RME and PA are significant error sources in the repeat-pass InSAR, which can cause phase errors in the final interferograms. In general, an external digital elevation model (DEM) can be used to estimate the RME and PA. However, it is hard to find a high-precision external DEM matching with the airborne InSAR data. Compared with the traditional InSAR technique, the 360° aperture gives circular InSAR (In-CSAR) the capability to estimate the RME and PA without external DEMs. Unlike previous approaches, in this article, a multiangle observation model is established to estimate RME and PA simultaneously. This model registers the DEM images obtained from different observation angles. In the field of image registration, the Demons algorithm is often used for nonrigid registration. We use, for the first time, the Demons algorithm to register multiangle false DEM images containing height errors and obtain the reference DEMs. Due to the gradient of the DEM image being destroyed by the RME and PA, a two-step preprocessing is proposed to achieve subpixel registration of multiangle false DEM images. After obtaining the reference DEM, the least square (LS) or robust mixed integer linear programming (RMILP) can estimate the unknown RME and PA. The results show that, with respect to the true values, the root-mean-square error (RMSE) of the calibrated DEMs is 0.37 m for the simulated dataset and 1.17 m for the real dataset. After correcting the RME-induced and PA-induced height errors, the RMSE of the DEM is improved by at least 92.6% for the simulated dataset and by at least 70.8% for the real dataset.

Analysis on Speed Error for Airborne Formation Flying InSAR

Speed error compensation method for airborne formation flying InSAR

Motion Error Analysis And Compensation For Airborne Formation Flying Insar

Formation Flying Insar Configuration Error Simulation And Compensation

Error Analysis and 3D Reconstruction Using Airborne Array InSAR Images

Error analysis of DEM derived from airborne single-pass interferometric SAR data.

A Novel Method for Airborne SAR Tomography Baseline Error Correction Driven by Small Baseline Interferometric Phase

The Analysis of Interferometric SAR Imaging Precision in the Distributed Micro-Satellite System

Interferometric Phase Error Analysis and Compensation in GNSS-InSAR: A Case Study of Structural Monitoring

Analysis of the InSAR Flattening Errors and Their Influence on DEM Reconstruction

Estimation of Residual Motion Errors and Phase Ambiguity for Repeat-Pass In-CSAR Without External DEMs

Error Analysis of Bistatic SAR Imaging and Stereoscopy Bistatic SAR

New Method Derived from Time-Vector Analysis for Generation of Elevation Information Based on Interferometric SAR Satellites

Analysis of the Virtual Baseline of Cluster SAR Satellites

Correction of Ionospheric Phase in SAR Interferometry Considering Wavenumber Shift

A new method derived from time-vector analysis for generation of elevation information based on formation flying interferometric sar satellites

Algorithm and Implementation of Phase Error Compensation for Airborne SAR

An Improvement To Flattening In Interferometric Sar Processing

Using Range Split-Spectrum Interferometry to Reduce Phase Unwrapping Errors for InSAR-Derived DEM in Large Gradient Region

Analysis and Compensation of Errors of Precalculated Satellite Overpass Time and Aircraft Navigation System in Spaceborne/airborne Hybrid Bistatic SAR

Modeling Orbital Error in InSAR Interferogram Using Frequency and Spatial Domain Based Methods