Abstract:Orbit error is one of the primary error sources of interferometric synthetic aperture radar (InSAR) and differential InSAR (D-InSAR) measurements, arising from inaccurate orbit determination of SAR platforms. Typically, orbit error in the interferogram can be estimated using polynomial models. However, correcting for orbit errors with significant time-varying characteristics presents two main challenges: (1) the complexity and variability of the azimuth time-varying orbit errors make it difficult to accurately model them using a set of polynomial coefficients; (2) existing patch-based polynomial models rely on empirical segmentation and overlook the time-varying characteristics, resulting in residual orbital error phase. To overcome these problems, this study proposes an automated block adjustment framework for estimating time-varying orbit errors, incorporating the following innovations: (1) the differential interferogram is divided into several blocks along the azimuth direction to model orbit error separately; (2) automated segmentation is achieved by extracting morphological features (i.e., peaks and troughs) from the azimuthal profile; (3) a block adjustment method combining control points and connection points is proposed to determine the model coefficients of each block for the orbital error phase estimation. The feasibility of the proposed method was verified by repeat-pass L-band spaceborne and P-band airborne InSAR data, and finally, the InSAR digital elevation model (DEM) was generated for performance evaluation. Compared with the high-precision light detection and ranging (LiDAR) elevation, the root mean square error (RMSE) of InSAR DEM was reduced from 18.27 m to 7.04 m in the spaceborne dataset and from 7.83~14.97 m to 3.36~6.02 m in the airborne dataset. Then, further analysis demonstrated that the proposed method outperforms existing algorithms under single-baseline and single-polarization conditions. Moreover, the proposed method is applicable to both spaceborne and airborne InSAR data, demonstrating strong versatility and potential for broader applications.

An Improvement To Flattening In Interferometric Sar Processing

INTERFEROMATIC SAR(INSAR) AND ITS APPLICATION TO EXTRACTION OF GEOLOGICAL INFORMATION

Error Analysis and 3D Reconstruction Using Airborne Array InSAR Images

Interferometric Phase Error Analysis and Compensation in GNSS-InSAR: A Case Study of Structural Monitoring

A Review Of Ten-Year Advances Of Multi-Baseline Sar Interferometry Using Terrasar-X Data

ScanSAR Interferometric Processing Using Existing Standard InSAR Software for Measuring Large Scale Land Deformation

A Phase-Based InSAR Tropospheric Correction Method for Interseismic Deformation Based on Short-Period Interferograms

Interferometric phase reconstruction with temporal decorrelation model constraints for time-series InSAR surface deformation monitoring

Interferometry Modeling and Height Reconstruction for High-Rise Buildings in Complex Scenes Based on One Single Interferogram

A Multi-Scale Spatial Difference Approach to Estimating Topography Correlated Atmospheric Delay in Radar Interferograms

A Modified Interferometric Phase Model for Imaging Integral Angle Applied to UAV InSAR

Conceptual Study and Performance Analysis of Tandem Multi-Antenna Spaceborne SAR Interferometry

Interferometric DEM-Assisted High Precision Imaging Method for ArcSAR

Improve Multi-Baseline InSAR Parameter Retrieval by Semantic Information from Optical Images.

Block Adjustment of Orientation Parameters and Interferometric Parameters Using Very High-Resolution SAR Data for DSM Mapping

Improvement of PS-InSAR Atmospheric Phase Estimation by Using WRF Model.

Application Potential of Differential SAR Interferometry in Land Subsidence Spatial-Temporal Data Capturing

Advances in interferometric synthetic aperture radar (InSAR) in earth system science

Atmospheric Effects on Ground-Based SAR Interferometric Measurements and Their Mitigation

Conceptual Study and Performance Analysis of Tandem Dual-Antenna Spaceborne SAR Interferometry

Automatic Correction of Time-Varying Orbit Errors for Single-Baseline Single-Polarization InSAR Data Based on Block Adjustment Model