Abstract:The objective of this work is to study the selective catalytic reduction (SCR) of NOx from diesel engine emissions over a new catalyst system and to find out the relationship between the activity of the catalyst and its surface structure. The catalysts doped with different metal elements (Mo, Sn and Ni) on HZSM-5 were prepared by using impregnation method. It was found that the Mo/ZSM-5 catalyst is the best one for NO decomposition reaction among Sn/ZSM-5, Mo/ZSM-5 and Ni/ZSM-5. Thus, four catalyst samples with Mo as active component were also prepared through different methods (ion-migration, impregnation, physically mixing and synthesizing). The results showed that, with NH3 as a reductant, and under the conditions of 0.06% NO-3.5 O-2-0.06%NH3-96.38%Ar and q(V)(feed)=300 ml/min, the catalyst prepared through ion-migration has the highest activity for SCR of NO and the NO conversion reaches to 95% at 360degreesC. The Mo/ZSM-5 samples were characterized by using XRD, SEM, ICP and EDS techniques respectively. The results indicated that the catalyst prepared through ion-migration has better dispersion of Mo on the inner surface of ZSM-5 than those prepared through other methods. This is probably responsible for its higher catalytic activity in SCR of NO. Then it was tentatively supposed that some special structure, which can favor the SCR of NO, may be in existence on the catalyst surface. On the other hand, the catalyst prepared through synthesis method showed good catalytic performance at low temperature, although its catalytic activity is lower than that of the sample prepared through ion-migration.

Experimental Study on NOx Emission Control of Lean Burn Gasoline Engine Using Ir-ZSM5 Zeolite Catalyst

Unraveling Alkali-Tolerance Role of Zeolite Coupling CeWOx Catalyst for NOx Reduction

Tailoring Iridium Valence States on ZSM-5 for Enhanced Catalytic Performance in CO Selective Catalytic Reduction of NO under Oxygen-Enriched Environments

Innovative In/H-SSZ-39 Catalysts: An Exploration in NOx Reduction via CH4-SCR

Selective Catalytic Reduction of NOx by Hydrocarbons over Copper-Free Metal Supported Zeolite

Selective Catalytic Reduction of NO X from Exhaust of Lean-Burn Engine over Ag-Al 2 O 3 /cordierite Catalyst

Triggers for cardiac events in patients with type 2 long QT syndrome.

Zeolites for Control of NOx Emissions: Opportunities and Challenges

Progress of Selective Catalytic Reduction of NOx with Methane over Zeolite-Based Catalysts

The study on the capacity of NOx storage-reduction catalyst for lean-burn engine

Unraveling the Synergistic Mechanism of Ir Species with Various Electron Densities over an Ir/ZSM-5 Catalyst Enables High-Efficiency NO Reduction by CO

Advances in Catalytic Removal of NO X under Lean-Burn Conditions

Hc, Co and Nox Emissions Reduction Efficiency of A Prototype Catalyst in Gasoline Bi-Mode Si/Hcci Engine

Selective Catalytic Reduction of NOx with Methane over Cobalt-Exchanged SSZ-39 Zeolite

Effect of addition of Zn on the catalytic activity of a Co/HZSM-5 catalyst for the SCR of NOx with CH4

Cu/Fe-UZM-35 Catalysts for NOx Abatement in Diesel Vehicles for Next-Stage Emission Standards

Selective Catalytic Reduction of NO over Mo/ZSM-5 Catalyst

Research Progress of the Selective Catalytic Reduction with NH3 over ZSM-5 Zeolite Catalysts for NOx Removal

Self-synthesis and performance analysis of a Cu-Fe composite ZSM-5 zeolitic catalyst for NOx reduction and particulate matter removal using NH3 SCR

Selective Catalytic Reduction of NO_x on Ag/Al_2O_3 Catalyst in Lean-Burn Gasoline Engines

Enhancement of nitric oxide reduction via CeZrOx/Cu‐SSZ‐39 hybrid catalyst: Improving activity and hydrothermal stability