An experimental study on failure mechanical behavior and cracking mechanism of rectangular solid sandstone containing two non-coplanar fissures under conventional triaxial compression
Sheng-Qi Yang,Wen-Ling Tian,Xiang-Ru Liu,Yan-Hua Huang,Jing Yang
DOI: https://doi.org/10.1016/j.tafmec.2021.102975
IF: 4.374
2021-08-01
Theoretical and Applied Fracture Mechanics
Abstract:<p>Fissures are generally existing in engineering rock mass, and cracking pattern observed in specimens with multiple fissures is analogous to the pattern obtained in specimens with two fissures, whereas the cracking coalescence of real rock specimen under triaxial compression have rarely been investigated. Therefore, thirty fissured rectangular specimens containing two non-coplanar fissures with different ligament angles were prepared to perform triaxial compression in this work, and the stress-strain curves, strength and deformation parameters, ultimate failure modes and Acoustic Emission (AE) characteristic were investigated. The experimental results indicate that pre-existing fissures has a significant effect on the stress-strain curves, more stress drops were observed before and after the peak strength, whereas confining pressure cannot reduce stress-drop. Cohesion (<em>C</em>) of peak strength and damage threshold has different trend with ligament angle (<em>β</em>), and the <em>C</em> of the peak strength is larger than that of the damage threshold. Pre-existing fissures has more effect on damage threshold than peak strength; cracks are easier initiate in fissured specimen. It is easier to coalesce when ligament parallel to the maximum principal stress, and cracks are easier expand in width direction than that in thickness direction. The coalescence of the two non-coplanar fissures is classed as five typical models, and the CT result show that crack distribution in depth direction is similar. Crack classification by AE parameter and k-mean method can reflect the cracking process in a certain extent. It is more drastic when shear crack initiating, and tensile crack propagates in a stable way.</p>
engineering, mechanical,mechanics