Abstract:The work here presents a thorough evaluation of the effect of Mn-Na-W/SiO2 catalyst surface parameters on its performance in the oxidative coupling of methane (OCM). To do so, we used microporous dealuminated β-zeolite (Zeo), or mesoporous SBA-15 (SBA), or macroporous fumed silica (Fum) as precursors for catalyst preparation, together with Mn nitrate, Mn acetate and Na2WO4. Characterizing the catalysts by inductively coupled plasma-optical emission spectroscopy, N2 physisorption, X-ray diffraction, high-resolution scanning electron microscopy-energy-dispersive spectroscopy, X-ray photoelectron spectroscopy, and catalytic testing enabled us to identify critical surface parameters that govern the activity and C2 selectivity of the Mn-Na-W/SiO2 catalyst. Although the current paradigm views the phase transition of silica to α-cristobalite as the critical step in obtaining dispersed and stable metal sites, we show that the choice of precursors is equally or even more important with respect to tailoring the right surface properties. Specifically, the SBA-based catalyst, characterized by relatively closed surface porosity, demonstrated low activity and low C2 selectivity. By contrast, for the same composition, the Zeo-based catalyst showed an open surface pore structure, which translated up to fourfold higher activity and enhanced selectivity. By varying the overall composition of the Zeo catalysts, we show that reducing the overall W concentration reduces the size of the Na2WO4 species and increases the catalytic activity linearly as much as fivefold higher than the SBA catalyst. This linear dependence correlates well to the number of interfaces between the Na2WO4 and Mn2O3 species. Our results combined with prior studies lead us to single out the interface between Na2WO4 and Mn2O3 as the most probable active site for OCM using this catalyst. Synergistic interactions between the various precursors used and the phase transition are discussed in detail, and the conclusions are correlated to surface properties and catalysis.

Study on Surface Characteristics of Oxidative Couple of Methane Catalysts

Preparation of OCM Catalysts by Mixing Method and Surface Characterization

CO and Methane Oxidation Over CeXZr1-XO2 Mixed Oxide Supported PdO Catalysts

Characterization and Catalytic Behavior of Na-W-Mn-Zr-S-P/Sio2 Prepared by Different Methods in Oxidative Coupling of Methane

Preparation and Performance of Cu Based Catalyst on Stainless Steel Wire Mesh

Critical Surface Parameters for the Oxidative Coupling of Methane over the Mn-Na-W/SiO2 Catalyst

Detailed kinetic modeling of catalytic oxidative coupling of methane

Influence of Surface Composition of Perovskite-Type Complex Oxides on Methane Oxidative Coupling

Surface coupling of methyl radicals for efficient low-temperature oxidative coupling of methane

A homogeneous‐heterogeneous kinetic study of oxidative coupling of methane (OCM) on La2O3/CeO2 catalyst

Impacts of Structure of CeO 2 /TiO 2 Mixed Oxides Catalysts on Their Performances for Catalytic Combustion of Dichloromethane

Catalytic Contribution of Reactor Wall Materials on Oxidative Coupling of Methane

Active oxygen center in oxidative coupling of methane on La2O3 catalyst

Promotional Effect of CeO2 and Y2O3 on CuO/ZrO2 Catalysts for Methane Combustion

Oxidative Coupling of Methane: A Microkinetic Model Accounting for Intraparticle Surface-Intermediates Concentration Profiles

Probing Low-Temperature OCM Performance over a Dual-Domain Catalyst Bed

Investigation of catalytic methane oxidation over Ag/Co2MOx (M = Co, Ni, Cu) catalysts with varying interfacial electron transfer

Oxidative coupling of methane—comparisons of MnTiO3–Na2WO4 and MnOx–TiO2–Na2WO4 catalysts on different silica supports

Intelligent Optimization of Na−Mn−W/SiO2 Catalysts for the Oxidative Coupling of Methane

Surface Properties And Catalytic Activities Of Pdo/Ceo2, Pdo/Tio2 And Pdo/Gamma-Al2o3 Catalysts