Abstract:In this work, the pyrolysis behavior of plastic waste—TV plastic shell—was investigated, based on thermogravimetric analysis and using a combination of model-fitting and model-free methods. The possible reaction mechanism and kinetic compensation effects were also examined. Thermogravimetric analysis indicated that the decomposition of plastic waste in a helium atmosphere can be divided into three stages: the minor loss stage (20–300°C), the major loss stage (300–500°C) and the stable loss stage (500–1000°C). The corresponding weight loss at three different heating rates of 15, 25 and 35 K/min were determined to be 2.80–3.02%, 94.45–95.11% and 0.04–0.16%, respectively. The activation energy ( E a ) and correlation coefficient ( R 2 ) profiles revealed that the kinetic parameters calculated using the Friedman and Kissinger–Akahira–Sunose method displayed a similar trend. The values from the Flynn–Wall–Ozawa and Starink methods were comparable, although the former gave higher R 2 values. The E α values gradually decreased from 269.75 kJ/mol to 184.18 kJ/mol as the degree of conversion ( α ) increased from 0.1 to 0.8. Beyond this range, the E α slightly increased to 211.31 kJ/mol. The model-fitting method of Coats–Redfern was used to predict the possible reaction mechanism, for which the first-order model resulted in higher R 2 values than and comparable E α values to those obtained from the Flynn–Wall–Ozawa method. The pre-exponential factors (ln A ) were calculated based on the F1 reaction model and the Flynn–Wall–Ozawa method, and fell in the range 59.34–48.05. The study of the kinetic compensation effect confirmed that a compensation effect existed between E a and ln A during the plastic waste pyrolysis.

THE INFLUENCE OF THERMOKINETICS CHARACTERISTICS OF PLASTIC WASTE ON PAH FORMATION BY TGA-FTIR ANALYSIS

Characterization of Microplastics in Environment by Thermal Gravimetric Analysis Coupled with Fourier Transform Infrared Spectroscopy.

Study on the Pyrolysis Properties of Aluminum-Plastic Package Waste

Kinetic simulation of PAHs formation during incineration of plastic

Investigating Kinetic Behavior and Reaction Mechanism on Autothermal Pyrolysis of Polyethylene Plastic

Thermogravimetric Analysis Investigation of Polyurethane Plastic Thermal Properties under Different Atmospheric Conditions

Investigation on the Synergistic Effect Between Different Components in Pyrolysis of Paper-Plastic Composite Material

Research on Pyrolysis Characteristics of Typical Plastics

Study on Pyrolysis Characteristics and Kinetics of Mixed Plastic Waste

Pyrolysis Kinetic Analysis of Molten Bioplastics Based on the Combination of Real-Time Characterization and Guassian Deconvolution: Case Study of Poly(lactic Acid) Materials

Kinetics, Product Evolution, and Mechanism for the Pyrolysis of Typical Plastic Waste

Study on the pyrolysis behaviors of mixed waste plastics

Pyrolysis Characterization and Mechanism Studies of Different Structural Plastics: A Comparative Study at Optimal Temperatures

Study on the co-pyrolysis of waste tires and plastics

Features of PAH Formation in Co-fired Combustion of Plastics and Coal on Small Sized Fluidized Beds

Thermal degradation of typical plastics under high heating rate conditions by TG-FTIR: Pyrolysis behaviors and kinetic analysis

Synergistic effect on low-pressure pyrolysis of biomass-plastic mixture as representative of Tibetan tourism solid waste

Thermal and spectroscopic (TG/DSC–FTIR) characterization of mixed plastics for materials and energy recovery under pyrolytic conditions

Synergistic effect on low-pressure pyrolysis of biomass-plastic mixture as representative of Tibetian tourism solid waste

Kinetic studies on the pyrolysis of plastic waste using a combination of model-fitting and model-free methods

Contribution of plastic solid components to volatile organic compounds formation during plastics combustion